We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cylindrical Ni-MH battery pack, green shrink wrap, white label, 128.54 by 24.1 by 22.3mm

Estry

Estry 3000mAh 3.6V Ni-MH standard battery for D-TEK Select 712-202-G1

SKU CH-S1KP-AW1S6

Replacement Ni-MH battery delivers 3000mAh at 3.6V for D-TEK Select refrigerant leak detectors

  • Specifications3.6
  • Battery Pack1 Year
  • Exact-fit replacement for D-TEK Select 712-202-G1 detector
  • 3000mAh Ni-MH capacity delivers 10.8Wh runtime per charge
  • Built-in overcharge, over-discharge and short-circuit protection
  • Certified to ISO9001, RoHS, CE and UN38.3 standards
  • Compact 128.54 x 24.1 x 22.3mm pack weighs 315.0g

Direct replacement for D-TEK Select 712-202-G1

This 3.6V Ni-MH pack delivers 3000mAh capacity and 10.8Wh energy rating. It matches the original A19267-460015-LSD and 712-700-G1 part numbers for Compass and D-TEK CO2 refrigerant leak detectors. The cell is certified to ISO9001, RoHS, CE, UN38.3 and MSDS standards.

Fits existing detector housing without modification

The pack measures 128.54 x 24.1 x 22.3mm and weighs 315.0g, matching the factory footprint. Built-in overcharge, over-discharge, over-voltage and short-circuit protection removes the need for external safety circuitry. No soldering or adapter cables are required for installation.

Low self-discharge chemistry runs cool under load

Ni-MH cells generate minimal heat during the intermittent duty cycles typical of leak detection work. The protection circuit limits peak current, keeping surface temperature stable and acoustic signature negligible. Rated 10.8Wh capacity supports extended field sessions between charges.

Highlights

  • Exact-fit replacement for D-TEK Select 712-202-G1 detector
  • 3000mAh Ni-MH capacity delivers 10.8Wh runtime per charge
  • Built-in overcharge, over-discharge and short-circuit protection
  • Certified to ISO9001, RoHS, CE and UN38.3 standards
  • Compact 128.54 x 24.1 x 22.3mm pack weighs 315.0g

Specifications

BrandNi-MH
Model3000mAh
Specifications3.6
Battery Pack1 Year

Questions about this item

How long will the 3000mAh Ni-MH pack run the D-TEK Select 712-202-G1 before needing a recharge?

The 3000mAh, 3.6V pack stores 10.8Wh, so runtime depends on the detector's current draw; heavy continuous use will deplete it faster than intermittent checks.

Does the battery get hot or make noise during all-day leak detection work?

Ni-MH chemistry runs silently and stays cool under normal load; the detector's own pump and electronics produce any audible sound or warmth.

Which charger do I need to recharge this 3.6V 3000mAh pack?

Use the D-TEK Select 712-202-G1's built-in charging circuit or a compatible smart charger rated for 3.6V Ni-MH packs of this capacity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.