We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular black lithium battery pack 91.25 by 41.6 by 20.2 mm 181.0 g 7.4 V 2600 mAh

Estry

Estry 2600mAh 7.4V Lithium Battery for FLIR B2 E2 E25 E45 E65 EX320

SKU CH-MM9W-YBWGK

Replacement lithium pack rated 7.4 V, 2600 mAh with built-in protection circuits for FLIR B2, E2, E25, E45, E65, EX320 and E320 thermal cameras

  • TypeBatteries
  • Battery Pack1-pack
  • Battery TypeLithium
  • Battery Capacity2600mAh
  • Battery Voltage7.4
  • 2600 mAh capacity extends thermal-camera run time
  • 4 V lithium chemistry matches original equipment spec
  • Built-in overcharge, over-discharge and short-circuit protection
  • Fits FLIR B2, E2, E25, E45, E65, EX320 and E320 models
  • Certified to ISO 9001, RoHS, CE and UN 38.3 standards

Replacement battery for FLIR E‑series cameras

This 7.4 V lithium cell delivers 2600 mAh and 19.24 Wh to FLIR B2, E2, E25, E45, E65 and EX320 thermal imagers. It matches the original T199366 and 1195106 part numbers so the camera recognises it without modification. Technicians carrying a spare can swap it in the field and resume inspections immediately.

Certified lithium pack with protection circuitry

The pack measures 91.25 × 41.6 × 20.2 mm and weighs 181.0 g, fitting the existing battery compartment without adapters. Built‑in over‑charge, over‑discharge, over‑voltage and short‑circuit safeguards meet ISO9001, RoHS, CE and UN38.3 requirements for safe transport and daily use.

Single‑pack limits for extended surveys

One battery supplies the rated capacity; long‑duration jobs need multiple charged packs because the camera cannot hot‑swap while operating. The 7.4 V output is fixed, so voltage‑sensitive accessories must tolerate this level. Users should verify the part number against their service manual before ordering.

Highlights

  • 2600 mAh capacity extends thermal-camera run time
  • 4 V lithium chemistry matches original equipment spec
  • Built-in overcharge, over-discharge and short-circuit protection
  • Fits FLIR B2, E2, E25, E45, E65, EX320 and E320 models
  • Certified to ISO 9001, RoHS, CE and UN 38.3 standards

Specifications

TypeBatteries
Battery Pack1-pack
Battery TypeLithium
Battery Capacity2600mAh
Battery Voltage7.4

Questions about this item

What voltage does this 7.4V lithium battery deliver and what capacity does that provide?

The pack supplies 7.4 volts and 2600mAh, giving 19.24Wh of energy for compatible FLIR thermal cameras.

Will the 91.25 x 41.6 x 20.2mm dimensions and 181.0g weight fit my FLIR E45 battery compartment?

Yes, the pack matches the original form factor for the E45 and all other listed FLIR models including B2, E2, E25, E65, EX320 and E320.

How do I install the replacement and what common mistake should I avoid?

Power off the camera, slide the old pack out, insert this pack until it clicks, then power on; the step users miss is confirming the part number T199366 or 1195106 matches the label on the original battery.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.