We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cylindrical lithium cell, silver metal finish, 60.2 x 35.1 x 33.4mm

Estry

Estry 14500mAh 3.6V lithium battery LS33600-CN1

SKU CH-9QPX-8Z3R2

Direct replacement lithium cell rated 3.6 V and 14500 mAh for Cameron Nuflo MC-II Plus and MC-III Plus flow analysers

  • TypeBatteries
  • Battery Pack1-pack
  • Battery TypeLithium
  • Battery Capacity14000mAh
  • Battery Voltage3.6
  • Direct replacement for Cameron NuFlo MC-II Plus and MC-III Plus flow analyzers
  • 14500 mAh capacity at 3.6 V delivers 52.2 Wh for extended field operation
  • Built-in over-charge, over-discharge, over-voltage and short-circuit protection
  • Certified to ISO 9001, RoHS, CE and UN38.3 standards
  • Compact 60.2 x 35.1 x 33.4 mm pack weighs 181.0 g

Direct Replacement for Cameron Nuflo Analyzers

This lithium battery replaces the original power cell in Cameron Nuflo MC-II Plus, MC-III Plus and EXP flow analyzers. It matches the factory specifications for voltage and capacity so the instrument operates without modification.

Built-In Protection Extends Service Life

Overcharge, over-discharge, over-voltage and short-circuit protection circuits are integrated into the pack. These safeguards reduce the risk of premature failure during continuous field use.

3.6 V 14500 mAh Capacity Determines Runtime

The pack delivers 3.6 volts and 14500 milliampere-hours, providing 52.2 watt-hours of energy. Verify that your analyzer requires this exact voltage and capacity before ordering.

Highlights

  • Direct replacement for Cameron NuFlo MC-II Plus and MC-III Plus flow analyzers
  • 14500 mAh capacity at 3.6 V delivers 52.2 Wh for extended field operation
  • Built-in over-charge, over-discharge, over-voltage and short-circuit protection
  • Certified to ISO 9001, RoHS, CE and UN38.3 standards
  • Compact 60.2 x 35.1 x 33.4 mm pack weighs 181.0 g

Specifications

BrandCameron Nuflo
TypeBatteries
Battery Pack1-pack
Battery TypeLithium
Battery Capacity14000mAh
Battery Voltage3.6

Questions about this item

How often will the LS33600-CN1 lithium cell need replacing in a Cameron Nuflo MC-II Plus flow analyzer?

The 14500mAh 3.6V pack is a primary lithium cell; it is not rechargeable, so replacement is required once the 52.2Wh capacity is depleted, which depends on the analyzer's duty cycle.

What runtime limit appears first when the LS33600-CN1 powers an MC-III Plus EXP continuously?

The 14500mAh capacity at 3.6V sets the total energy budget of 52.2Wh; sustained current draw from the flow analyzer will drain this finite reserve until voltage drops below the device's operating threshold.

Does the LS33600-CN1 generate noticeable heat or noise during all-day operation in a Nuflo analyzer?

As a sealed primary lithium cell with no moving parts, it produces no acoustic noise; self-heating under load is minimal and the 181.0g pack dissipates any warmth through its 60.2 x 35.1 x 33.4mm case.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.