Ultimaxx
Ultimaxx NP-W126 Battery Kit 1400 mAh x2 32 GB SD Card Case Cloth
$21.99
0.00026544BTC
In stock
Estry
Estry 1064000-J standard battery 12 V 700 mAh 8.4 Wh
Ni-MH 12 V 700 mAh 8.4 Wh replacement pack for Tri-Tronics 1064000-J and 1064000D models
- Specifications12
- Battery Pack1 Year
- 12 V 700 mAh Ni-MH pack powers compatible Tri-Tronics devices
- 4 Wh capacity supports extended operation between charges
- ISO 9001, CE, RoHS and UN 38.3 certified for safety
- Compact 87.06 × 29.55 × 23.25 mm design fits original battery bay
- 5 g lightweight construction keeps equipment portable
Replacement for Tri-Tronics DC-12
This 12 V Ni-MH pack delivers 700 mAh and 8.4 Wh in the exact footprint of the original Tri-Tronics DC-12 cell. It fits the 1064000-J and 1064000D models without modification. Built-in protection guards against overcharge, over-discharge, over-voltage and short circuit. Certified to ISO9001, RoHS, CE, UN38.3 and MSDS standards.
Ideal for field radio upkeep
Technicians maintaining compatible Tri-Tronics gear can swap the pack in minutes and restore full runtime. Buyers whose equipment uses a different voltage, chemistry or connector will find this pack unsuitable. Shops needing lithium-ion energy density or a higher capacity than 700 mAh should look at other chemistries.
12 V nominal voltage
The single specification that decides fit is the 12 V nominal output. If the host device requires a different voltage the pack will not operate correctly. Confirm the 1064000-J or 1064000D part number on the original battery before ordering.
Highlights
- 12 V 700 mAh Ni-MH pack powers compatible Tri-Tronics devices
- 4 Wh capacity supports extended operation between charges
- ISO 9001, CE, RoHS and UN 38.3 certified for safety
- Compact 87.06 × 29.55 × 23.25 mm design fits original battery bay
- 5 g lightweight construction keeps equipment portable
Specifications
| Brand | Ni-MH |
|---|---|
| Model | 700mAh |
| Specifications | 12 |
| Battery Pack | 1 Year |
Questions about this item
How can I confirm the 12.0 V 700 mAh pack is delivering power after installation?
Measure the pack voltage with a multimeter; a healthy unit reads about 12.0 V. If the device powers on and runs for the expected duration the battery is working.
What comes in the box and do I need any extra hardware to fit the 87.06 x 29.55 x 23.25 mm unit?
The replacement cell is supplied alone. No cables, connectors or mounting brackets are included so reuse the original hardware from the DC-12 pack.
My device lists part numbers 1064000-J and 1064000D — which one should I select?
Both part numbers refer to the same 12 V 700 mAh Ni-MH pack. Choose the listing that matches the label on your original battery.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
