We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

ESTONE

ESTONE USB 3.0 to SATA Adapter Cable 22 pin 45 cm with Power Adapter

SKU CH-CWC7-MCMCR

Connect 2.5 or 3.5 inch SATA drives via USB 3.0 at up to 5 Gbps with included power adapter

  • ColorBlack
  • Connect any 2.5" or 3.5" SATA drive via USB
  • Transfer data at up to 5 Gbps with UASP
  • Works with Windows, Mac OS X and Linux
  • Plug-and-play with no driver installation needed
  • Includes 45 cm cable and power adapter for 3.5" drives

Portable SATA-to-USB 3.0 adapter

This 22-pin cable connects any 2.5" or 3.5" SATA hard drive or solid-state drive to a USB 3.0 port. The 45 cm length keeps the link tidy on a desk or bench. A bundled power adapter feeds the drive so larger 3.5" units spin up reliably. It suits technicians and home users who need quick, temporary access to bare drives.

Suits drive recovery and data migration

Ideal for cloning an old system disk, pulling files from a retired laptop drive or testing a spare SSD before installation. UASP support raises throughput on compatible hosts. Not suited for permanent external storage where a rugged enclosure protects the drive. Buyers who want a bus-powered-only solution for 2.5" drives should look elsewhere.

Transfer rate up to 5 Gbps

The USB 3.0 interface caps burst throughput at 5 Gbps, backward compatible with USB 2.0 and 1.1. Real-world speed depends on the attached drive and host controller. This single figure tells you whether the adapter meets your performance target.

Highlights

  • Connect any 2.5" or 3.5" SATA drive via USB
  • Transfer data at up to 5 Gbps with UASP
  • Works with Windows, Mac OS X and Linux
  • Plug-and-play with no driver installation needed
  • Includes 45 cm cable and power adapter for 3.5" drives

Specifications

ColorBlack

Questions about this item

How do I install the ESTONE USB 3.0 to SATA adapter, and what step do people often miss?

Connect the 22-pin SATA end to the 2.5" or 3.5" drive, plug the USB 3.0 connector into the computer, then attach the included power adapter to the cable and a wall outlet; the step often missed is powering the adapter before the drive spins up.

What maintenance or replacement will this adapter need later?

The 45 cm cable and 22-pin connector are passive; no firmware updates or wear items exist, but if the USB 3.0 plug or power jack loosens after repeated insertion cycles, replace the whole adapter.

What limit appears first under sustained heavy transfers?

The USB 3.0 interface caps throughput at 5 Gbps, and real-world speed drops to the drive's own SATA II or III ceiling; thermal throttling of the drive itself usually becomes the bottleneck before the adapter overheats.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.