We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small black box with BNC input, BNC loop output and HDMI port, plus 5V power adapter

ESTONE

ESTONE TVI CVI AHD CVBS to HDMI Converter 1080p 720p 60Hz BNC Loop Out

SKU CH-VAHT-H0P3V

Converts TVI, CVI, AHD and CVBS camera signals to 1080p or 720p HDMI at 60Hz with a BNC loop output for coax runs up to 700 metres

  • TypeTVI/CVI/AHD to HDMI Converter
  • Connector AOne channel CVI/TVI/AHD/CVBS BNC input
  • Connector BOne Channel CVI/TVI/AHD/CVBS BNC loop output;1x One channel
  • Package Contents1x TVI/CVI/AHD to HDMI Converter 1x 5V/1A Power Adapter and
  • Converts TVI CVI AHD CVBS camera signals to HDMI for direct monitor viewing
  • HDMI output selectable at 1080p or 720p at 60Hz for flexible display matching
  • BNC loop output allows daisy-chaining multiple monitors from a single camera feed
  • Auto-detects input resolutions up to 8MP across TVI AHD and CVI formats
  • Coaxial cable runs of 500 to 700 metres supported depending on resolution

Security camera signal converter

The ESTONE converter translates TVI CVI AHD and CVBS security camera signals over a single BNC input into an HDMI output that runs at 1080p or 720p at 60Hz. Installers and system integrators can connect the unit directly to a monitor or DVR without configuring drivers or software.

Passive operation with loop-through

The device draws power from the included 5V 1A adapter and adds no active cooling, so it runs silently in a rack or on a desk. A BNC loop output passes the original coaxial signal onward, allowing cable runs of 500 to 700 metres while the HDMI feed drives a local display.

Ready-to-use kit

The package supplies the converter, the 5V 1A power adapter with cable, and a user manual, so the installer has everything needed for immediate deployment. No additional cables, mounting brackets or licences are required to begin viewing camera feeds on an HDMI screen.

Highlights

  • Converts TVI CVI AHD CVBS camera signals to HDMI for direct monitor viewing
  • HDMI output selectable at 1080p or 720p at 60Hz for flexible display matching
  • BNC loop output allows daisy-chaining multiple monitors from a single camera feed
  • Auto-detects input resolutions up to 8MP across TVI AHD and CVI formats
  • Coaxial cable runs of 500 to 700 metres supported depending on resolution

Specifications

TypeTVI/CVI/AHD to HDMI Converter
Connector AOne channel CVI/TVI/AHD/CVBS BNC input
Connector BOne Channel CVI/TVI/AHD/CVBS BNC loop output;1x One channel HDMI output
Package Contents1x TVI/CVI/AHD to HDMI Converter
1x 5V/1A Power Adapter and Cable
1x 1x User Manual

Questions about this item

How do I connect the converter and which step do installers often miss?

Connect the camera BNC to the input, run an HDMI cable from the converter to the monitor, plug in the 5V/1A adapter, then use the side switch to pick 720p or 1080p at 60Hz. The step often missed is setting the resolution switch before powering up.

What part will need replacement first during long-term use?

The external 5V/1A power adapter is the only replaceable component; the converter itself has no moving parts or user-serviceable items.

What limit appears first when the converter runs continuously?

The HDMI output is fixed at 1080p or 720p at 60Hz, so higher-resolution camera feeds are downscaled; the coaxial link works up to 500-700 metres depending on the resolution used.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.