We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black aluminium capture box with HDMI in and out plus 3.5 mm audio ports

ESTONE

ESTONE OZC10 USB 3.2 4K 60fps HDMI 2.0 Video Capturing Device

SKU CH-W0HH-H6FAA

Captures 4K 60fps HDMI 2.0 video via USB 3.2 with 4K 60Hz HDR loop-out, 3.5mm audio I/O, and VRR support for smooth streaming

  • InterfaceUSB 3.2
  • Resolution Support4K
  • Camera ResolutionUp to 4K Video
  • ColorBlack
  • HDMI1 Input/1 Output
  • USB Port1
  • True 4K 60fps capture and loop-out via HDMI 2.0
  • Up to 240fps at 1080p or 144fps at 1440p pass-through
  • HDR 12-bit colour and VRR for smoother streaming images
  • 5mm mic and headphone ports for live commentary and monitoring
  • USB 3.2 UVC plug-and-play on Windows 10+ or macOS 10.10+

What this capture device does

The ESTONE OZC10 is a USB 3.2 video capture device that accepts an HDMI 2.0 signal up to 4K at 60 frames per second and sends the stream to a computer over a single USB-C connection. It is built for streamers, content creators and gamers who want to record or broadcast gameplay from consoles such as the Nintendo Switch, PS4, PS5 or Xbox One, as well as from cameras or other HDMI sources.

Practical limits of the HDMI 2.0 and USB 3.2 link

The HDMI 2.0 input passes through 4K at 60 Hz with HDR and variable refresh rate, while the capture engine records at the same 4K 60 fps or at 1080p 240 fps and 1440p 144 fps. Audio is handled through 3.5 mm input and output jacks for microphone and headphone monitoring. The device requires a host running Windows 10 or later or macOS 10.10 or later and operates as a standard UVC device with no driver installation.

Check your setup before ordering

Verify that your source device can output a clean HDMI signal at one of the supported resolutions and frame rates listed above. Ensure your computer has a free USB 3.2 (or compatible) Type-C or Type-A port and meets the operating-system requirement. Confirm you have capture or streaming software that works with UVC devices, and that you have the necessary HDMI cables for both the input and the loop-through output to your display.

Highlights

  • True 4K 60fps capture and loop-out via HDMI 2.0
  • Up to 240fps at 1080p or 144fps at 1440p pass-through
  • HDR 12-bit colour and VRR for smoother streaming images
  • 5mm mic and headphone ports for live commentary and monitoring
  • USB 3.2 UVC plug-and-play on Windows 10+ or macOS 10.10+

Specifications

BrandESTONE
SeriesOZC10
ModelOZC10
InterfaceUSB 3.2
Resolution Support4K
Camera ResolutionUp to 4K Video
ColorBlack
HDMI1 Input/1 Output
USB Port1
Option4K

Questions about this item

Should I choose the 4K 60Hz model or a lower-resolution capture card?

The OZC10 captures and passes through at 4K 60fps, plus 1440p 144Hz and 1080p 240Hz, so you only need this one model for all those resolutions.

What does the 4K 60fps rating actually deliver when I plug it into my PC?

You get true 4K 60fps recording and streaming with low latency, plus HDR 12-bit colour and VRR for tear-free gameplay footage.

How does the USB 3.2 interface limit what I can capture?

USB 3.2 provides enough bandwidth for uncompressed 4K 60fps, 1440p 144Hz and 1080p 240Hz signals without compression artefacts.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.