We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black H7 LED bulbs with clear lenses and compact drivers, sold as a pair

ESTONE

ESTONE H7 LED Headlight Bulbs Conversion Kit 6500K 8000LM Set 50W

SKU CH-7ZYB-31H3W

An H7 LED conversion kit delivering 8000 lumens per set at 6500 K with IP68 waterproofing

  • TypeHeadlights
  • Switch IncludedYes
  • Selling UnitSet of 2
  • Color/Finish6000K (Pure White)
  • Beam Angle Range8 to 60 deg
  • Beam TypeDual Beam

Size H7

  • Cool-white 6500 K output gives 8000 lm per set for brighter night vision
  • Dual-beam design covers 8 to 60° spread with no dark spots or foggy light
  • IP68-rated driver and connectors survive full water immersion
  • Plug-and-play H7 fitment draws 25 W per bulb on 9–14.5 V systems
  • Rated beyond 100 000 hrs with no fan and low heat for long service life

ESTONE H7 LED Conversion Kit

The ESTONE H7 LED conversion kit replaces factory halogen bulbs with a pair of CSP LED units that deliver 8000 lumens per set at 6500K colour temperature. Each bulb draws 25 watts from a 9 to 14.5 volt supply and uses dual-polarity current control for stable operation. The kit is sold as a matched set of two for driver and passenger sides.

IP68 Waterproof Build and Plug-and-Play Mounting

The driver, housing and connectors carry an IP68 rating so the assembly survives immersion and extreme weather without a cooling fan. A compact driver and dual-polarity plugs allow direct installation into the existing H7 sockets without rewiring the vehicle harness. The clear lens and black housing keep the factory headlamp appearance while the beam angle spans 8 to 60 degrees.

Upgrade from Halogen or HID for Brighter Output

The kit provides up to 30 percent more light on the road than a standard halogen H7 bulb while consuming less power and producing far less heat. It is not suited for vehicles that require a different base type or for buyers who need a high-beam-only or low-beam-only solution. The 100,000-hour rated life makes the jump worthwhile when the original bulbs have dimmed or failed.

Highlights

  • Cool-white 6500 K output gives 8000 lm per set for brighter night vision
  • Dual-beam design covers 8 to 60° spread with no dark spots or foggy light
  • IP68-rated driver and connectors survive full water immersion
  • Plug-and-play H7 fitment draws 25 W per bulb on 9–14.5 V systems
  • Rated beyond 100 000 hrs with no fan and low heat for long service life

Specifications

BrandESTONE
TypeHeadlights
Switch IncludedYes
Selling UnitSet of 2
Color/Finish6000K (Pure White)
Beam Angle Range8 to 60 deg
Beam TypeDual Beam
SizeH7
Current ControlYes
Current Draw2 watts
Dual PolarityYes
Forward Voltage9-14.5V
High PowerYes
Housing ColorBlack
Lens ColorClear
Light Bulb IncludedYes
Light Color Temperature6000K (Pure White)
Light SourceLED
LocationDriver and Passenger Side, Mounted on Body
Lumen Output3200
Operating Voltage12-24V
Product FitDirect Fit Performance
V-Star Rating5
Wiring Harness IncludedYes
CAN bus CompatibilityYes
Certification/StandardsDOT
MaterialABS
QualityPerformance
ShapeRound

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What voltage range does the H7 LED conversion kit support, and what forward voltage does it cap at?

The kit operates on a 9 to 14.5 volt forward voltage range, compatible with standard 12V vehicle electrical systems.

What physical size and base type must the vehicle headlight housing accept for these bulbs to fit?

The bulbs use an H7 base and are sold as a set of two for driver and passenger side mounting on the vehicle body.

How are the ESTONE H7 LED bulbs installed, and what common wiring step is eliminated?

Installation is plug-and-play with no need to use the original car circuit wires; the kit includes a switch and waterproof IP68 driver and connectors.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.