ESTONE DisplayPort Fiber Optic Cable 33ft 8K 60Hz 4K 144Hz DP 1.4 32.4Gbps Black

33 ft Fiber Optic DisplayPort Cable

This fiber optic DisplayPort cable spans 33 ft and carries DP 1.4 signals at up to 32.4 Gbps. It supports 8K resolution at 60 Hz and 4K at 144 Hz with HDR and HDCP 2.2 compliance. The male-to-male connectors are gold plated and the cable uses solid copper conductors with double shielding. It is designed for home theater, gaming, office, VR or workstation extension.

Directional Single-Link Limitation

The cable is directional and must be connected with the Source end to the computer and the Display end to the monitor. It supports DP 1.2 and 1.4 standards but only transmits in one direction, so it cannot be reversed. The optical fiber allows lossless transmission up to 100 meters without signal degradation or delay. Both source and display devices must natively support the target resolution and refresh rate for the cable to deliver 8K 60 Hz or 4K 144 Hz output.

Optical Build for Long Runs

The optical fiber construction eliminates electromagnetic interference and maintains signal integrity over the full 33 ft length. Solid copper conductors and double shielding reinforce the electrical sections at each end. The fixed male-to-male DP 1.4 connectors require correct orientation during installation and cannot be detached or swapped. This build suits permanent installs where cable routing exceeds the reach of passive copper cables.