We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black DisplayPort cable with male connectors on both ends, 65.6 ft long

ESTONE

ESTONE DisplayPort 1.4 cable 20m 65.6ft 8K 60Hz 4K 144Hz HBR3 32.4Gbps

SKU CH-XNR9-HXG1X

A 20-metre optical fibre DisplayPort 1.4 cable carrying 8K at 60 Hz or 4K at 144 Hz with 32.4 Gbps bandwidth

  • TypeDisplayPort Cable
  • ColorBlack
  • Length65 ft.
  • Cable Length65.6 ft.
  • Connector Number1
  • Connect From1 x DisplayPort 1.4

Cable Length 65.6 ft.

  • Supports 8K at 60 Hz via DisplayPort 1.4
  • Delivers 4K at 144 Hz for high-refresh gaming
  • Optical fiber enables 20 m runs without signal loss
  • 4 Gbps bandwidth handles uncompressed UHD video
  • Directional connectors ensure correct source-to-display orientation

20 m DisplayPort 1.4 fibre cable

This 20 m optical DisplayPort 1.4 cable carries 8K at 60 Hz and 4K at 144 Hz over a single male-to-male link. It uses four fibre cores for the main signal and copper for the auxiliary channel, delivering 32.4 Gbps bandwidth without signal loss at distances where copper cables fail. The 65.6 ft length suits installations that must cross large rooms or run through conduit.

Fixed-direction link for long-run installs

The cable is unidirectional: the "Source" plug must go into the GPU or laptop and the "Display" plug into the monitor or projector; reversing them yields no picture. This makes it ideal for permanent home-theatre, office or VR runs where the cable stays in place. It is not suited for users who frequently swap displays or need a reversible cable for bench testing.

8K 60 Hz and 4K 144 Hz over 20 m

The decisive spec is the certified 8K 60 Hz and 4K 144 Hz performance at the full 20 m length. If your source and sink both support those modes, the cable will deliver them; if either device tops out at lower resolutions or refresh rates, the cable simply operates at the highest common setting.

Highlights

  • Supports 8K at 60 Hz via DisplayPort 1.4
  • Delivers 4K at 144 Hz for high-refresh gaming
  • Optical fiber enables 20 m runs without signal loss
  • 4 Gbps bandwidth handles uncompressed UHD video
  • Directional connectors ensure correct source-to-display orientation

Specifications

BrandLUOM
ModelT0109
TypeDisplayPort Cable
ColorBlack
Length65 ft.
Cable Length65.6 ft.
Connector Number1
Connect From1 x DisplayPort 1.4
Connect To1 x DisplayPort 1.4
Terminal GenderMale to Male
SpeedTest
ShieldingDouble-shielded
ConductorSolid Copper Conductor
Constructiontest123
Sound QualityProduction Test

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will this 20 m DisplayPort 1.4 cable work with my older GPU that only has DP 1.2 outputs?

The cable is rated for DisplayPort 1.2 and 1.4 at 32.4 Gbps so it will carry a DP 1.2 signal from your GPU to the monitor without issue.

How can I verify the 8K 60 Hz link is active after I connect the cable?

The cable supports 7680 x 4320 at 60 Hz and 4K at 144 Hz; your graphics control panel or monitor OSD will show the active resolution and refresh rate once the link is trained.

The cable has Source and Display ends — do I need any extra adapters or power for the 65.6 ft run?

No separate power or adapters are required; the optical fiber cable draws power from the DisplayPort ports themselves and is a direct male-to-male connection.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.