We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Metal network switch with sixteen PoE ports and two SFP slots

ESCAM Technology Co., Ltd

ESCAM Technology Co., Ltd ONV-POE33018PFM-at 16-port 10/100/1000 PoE network switch

SKU CH-C3MW-FTA3G MPN ONV-POE33018PFM-at

16 PoE ports and 2 SFP uplinks deliver 400 W total power with Layer 2+ management and 9.6 KB jumbo frames

  • Switch TypePOE Switch
  • Package Contents1
  • 16 PoE ports power IP cameras and phones directly
  • 2 Gigabit SFP slots enable fibre uplinks for long runs
  • 400 W PoE budget feeds all ports at full IEEE 802.3at power
  • L2+ features add VLAN, QoS and security for managed networks
  • Jumbo frames up to 9.6 KB boost throughput for large data transfers

16-port PoE switch with SFP uplinks

The ESCAM ONV-POE33018PFM-at is a managed PoE switch built for networks that need both data and power on every copper port. It delivers sixteen 10/100/1000M PoE ports and two Gigabit SFP optical uplinks in a single chassis. The total PoE budget reaches 400W under the IEEE802.3af/at standard. Layer 2+ features such as 802.1Q VLAN, port isolation, IGMP snooping, DHCP snooping and ACLs give administrators fine-grained control over traffic and security.

Suited for surveillance, VoIP and wireless roll-outs

This switch fits installers who need to power IP cameras, IP phones or wireless access points from the network cable and who want managed features such as SNMP, SSH, CLI and web-based configuration. It also supports jumbo frames at 9.6K and spanning-tree protocols for redundant topologies. Buyers who require 10-Gigabit uplinks, a larger PoE budget or Layer 3 routing should look at a different class of switch.

400W total PoE budget

The single specification that determines whether this unit meets the project is the 400W aggregate power limit across all sixteen PoE ports. Every connected device draws from this shared pool, so the number of powered endpoints you can support depends on each device’s actual consumption. Verify the per-port draw of your cameras or phones against this 400W ceiling before committing.

Highlights

  • 16 PoE ports power IP cameras and phones directly
  • 2 Gigabit SFP slots enable fibre uplinks for long runs
  • 400 W PoE budget feeds all ports at full IEEE 802.3at power
  • L2+ features add VLAN, QoS and security for managed networks
  • Jumbo frames up to 9.6 KB boost throughput for large data transfers

Specifications

BrandONV
ModelONV-POE33018PFM-at
Switch TypePOE Switch
Package Contents1

Questions about this item

Should I pick the 16-port model or the 8-port version for my IP camera setup?

The 16-port ONV-POE33018PFM-at gives you 16 PoE ports plus 2 Gigabit SFP uplinks, while the 8-port model provides half the PoE density for smaller deployments.

What does the 400 W PoE budget actually deliver to connected cameras and access points?

The 400 W total budget is shared across all 16 ports; each port complies with IEEE802.3af/at so you can power a mix of 802.3af and 802.3at devices up to the per-port limit.

Are the two SFP ports limited to 1 Gbps or can they run at 10 Gbps?

The two SFP optical ports are Gigabit speed, so each uplink caps at 1 Gbps and they do not support 10 Gbps modules.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.