We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Metal rackmount network switch with eighteen front ports and ventilation slots

ESCAM Technology Co., Ltd

ESCAM Technology Co., Ltd ONV-POE33018PFM 16-port PoE + 2 SFP network switch

SKU CH-FR0Q-S6VNV MPN ONV-POE33018PFM

An 18-port managed PoE switch with 16 gigabit PoE ports, two SFP uplinks and a 250 W power budget for IP cameras, phones or wireless access points

  • Switch TypePOE Switch
  • Package Contents1
  • 16 PoE ports power cameras and phones directly
  • 2 SFP slots add fibre uplinks for distance
  • 250 W budget feeds every port simultaneously
  • L2+ management enables VLANs and QoS control
  • Jumbo frames up to 9.6 KB boost throughput

18-Port Gigabit Managed PoE Switch

This switch delivers sixteen 10/100/1000 Mbps PoE ports and two Gigabit SFP uplinks for fibre connectivity. It provides a total PoE budget of 250 W compliant with IEEE 802.3af/at standards. Layer 2+ management features include VLAN, QoS, IGMP Snooping and port isolation. Remote configuration is supported via Web, CLI, SSH and SNMP interfaces.

Surveillance and Access Networks

The port count and power budget suit IP camera systems, wireless access point clusters and VoIP phone deployments needing managed switching. Environments requiring 10 Gbps uplinks or a larger aggregate PoE budget for high-power pan-tilt-zoom cameras should evaluate higher-specification alternatives. Installations without fibre backbone requirements may find the dual SFP ports unnecessary for their topology.

250 W Total PoE Budget

The 250 watt limit governs how many powered devices can operate simultaneously across the sixteen ports. Calculate the per-device draw of your cameras or access points against this ceiling before committing to this model. If the summed demand exceeds 250 W, a switch with a larger power supply is required.

Highlights

  • 16 PoE ports power cameras and phones directly
  • 2 SFP slots add fibre uplinks for distance
  • 250 W budget feeds every port simultaneously
  • L2+ management enables VLANs and QoS control
  • Jumbo frames up to 9.6 KB boost throughput

Specifications

BrandONV
ModelONV-POE33018PFM
Switch TypePOE Switch
Package Contents1

Questions about this item

How much heat and power does the 250 W PoE budget generate when all 16 ports run continuously?

The switch delivers up to 250 W total PoE power across its 16 Gigabit PoE ports; actual heat output depends on how many powered devices draw current at any moment.

Which SFP transceivers must I already own to use the two Gigabit SFP optical ports?

The two uplink ports accept standard Gigabit SFP modules; you supply the transceivers and fibre patch cables that match your link distance and wavelength.

Will the 10/100/1000M PoE ports auto-negotiate with my older 100 Mbps IP cameras?

Yes, each of the 16 PoE ports supports 10, 100 and 1000 Mbps speeds and will negotiate down to 100 Mbps for legacy cameras while still providing IEEE 802.3af/at power.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.