We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Copper bonded steel ground rod with pointed end

Eritech

Eritech 615840 Copper Bonded Ground Rod 4 ft

SKU CH-9GBY-2C338

A 4 ft copper bonded steel ground rod with a 10 mil coating and pointed end, rated for a 30-year service life under IEC EN 62561-2 and UL 467 standards

  • TypeCable Management & Conduit
  • ColorTransparent
  • Copper-bonded steel resists corrosion for long service life
  • 10 mil copper coating meets IEC EN 62561-2 and UL 467 standards
  • Pointed end drives easily into soil for secure grounding
  • 4 ft length suits typical residential and light commercial installations
  • Weighs 3.4 lb for manageable handling and transport

Ground Rod for Electrical Earthing

The Eritech 615840 is a copper bonded steel ground rod designed for electrical earthing installations. Its pointed end allows it to be driven directly into soil. The 10 mil copper coating provides corrosion resistance for a 30-yr service life. It meets IEC EN 62561-2 and UL 467 standards for grounding applications.

Driven Installation with Standard Tools

Installation requires driving the rod vertically into the ground using a hammer or powered driver until the top is at or below grade. The pointed tip penetrates typical soil conditions without pre-drilled holes. Rocky or compacted terrain can bend the rod or damage the copper coating, reducing corrosion protection. A listed ground clamp must be used to secure the conductor to the rod.

Four Foot Length for Standard Depths

At 4 ft overall length, this rod suits installations where code permits a single electrode at this depth. The 5/8 in diameter and 3.4 lb weight allow manual handling and driving by one person. It provides a single path to earth; installations requiring lower resistance or multiple electrodes will need additional rods and connectors. The copper bonded construction supports the rated service life in normal soil.

Highlights

  • Copper-bonded steel resists corrosion for long service life
  • 10 mil copper coating meets IEC EN 62561-2 and UL 467 standards
  • Pointed end drives easily into soil for secure grounding
  • 4 ft length suits typical residential and light commercial installations
  • Weighs 3.4 lb for manageable handling and transport

Specifications

BrandNVENT ERICO
TypeCable Management & Conduit
ColorTransparent

Questions about this item

How can I verify the 10 mil copper coating is intact after driving the rod?

Inspect the surface for continuous copper colour without exposed steel; the rod meets IEC EN 62561-2 and UL 467 so the coating thickness is factory-controlled.

Does the package include clamps or wire, or must I buy them separately?

The rod is sold as a single 4 ft pointed copper-bonded steel section; clamps, connectors and conductor wire are not included and must be purchased separately.

Should I choose the 4 ft length or a longer version for a 30-yr service life?

The 4 ft model already carries the 30-yr service-life rating under the listed standards; select a longer rod only if local code requires deeper electrode placement.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.