Ericson
Ericson 2630-CW6P-AM L18-30R 30 A 120/208 V Three-Pole Locking Connector
Three-pole locking connector rated 30 A at 120/208 V AC with IP69K protection and antimicrobial housing
- TypeElectrical Connectors
- 30 A rating supports heavy-duty three-phase loads
- IP69K housing resists high-pressure wash-down environments
- Antimicrobial thermoplastic elastomer reduces surface contamination
- L18-30R NEMA configuration ensures correct three-phase mating
- Screw terminals accept cable from .64 in to .93 in diameter
Ericson L18-30R Three-Phase Connector
The Ericson 2630-CW6P-AM is a straight-orientation locking connector rated for 30 A at 120/208V AC. It uses a NEMA L18-30R four-pole, four-wire configuration suited for three-phase industrial power distribution. The housing is yellow thermoplastic elastomer with an antimicrobial finish and a shrouded design for durability.
Suited for three-phase equipment up to 30 A
This connector fits industrial machinery and temporary power setups that require a secure, high-protection link. It accepts cable diameters from .64 in to .93 in using screw terminals. Installers needing a different NEMA arrangement, a higher current rating, or a non-shrouded body should select an alternative part.
IP69K ingress protection
The connector meets IP69K, meaning it withstands close-range high-pressure, high-temperature washdown. This rating is the deciding factor for food-processing, pharmaceutical, and heavy-industrial environments where sanitation cycles are mandatory.
Highlights
- 30 A rating supports heavy-duty three-phase loads
- IP69K housing resists high-pressure wash-down environments
- Antimicrobial thermoplastic elastomer reduces surface contamination
- L18-30R NEMA configuration ensures correct three-phase mating
- Screw terminals accept cable from .64 in to .93 in diameter
Specifications
| Brand | Ericson |
|---|---|
| Type | Electrical Connectors |
Questions about this item
What cable diameter range does the Ericson 2630-CW6P-AM connector accept?
The connector fits cables from .64 in to .93 in outer diameter, matching the screw-terminal wiring chamber.
How do you install the locking connector, and which step is often missed?
Strip each conductor, insert into the four screw terminals, tighten to spec, then engage the shrouded locking collar until it clicks — the collar click is the step installers skip.
When should the antimicrobial thermoplastic housing be inspected or replaced?
Inspect the yellow IP69K housing after heavy wash-down cycles; replace if the antimicrobial surface shows cracking, discoloration, or the lock collar no longer latches securely.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Thomas & Betts TY523M Cable Tie 18lb 4in Natural Nylon Stainless Steel Locking Clip Pack 100
CALBRITE S60700FDCC Weatherproof Electrical Box 5.90" x 2.83" 25 cu in
- Electrical Boxes &…
HOFFMAN A12P10G Interior Panel Steel 10.75in H 8.88in W 14 Gauge
- Electrical Boxes &…



