We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black articulated monitor arm with desk clamp, cable routing channels and VESA plate visible

Ergotron

Ergotron LX Pro Arm Single Display Desk Mount Black 45682292

SKU CH-KP2M-MT8RC

A desk mount holds one screen up to 34 inches and 22 pounds, raising it 13 inches with 18.3 inches of total height, 360-degree rotation and 85-degree tilt

  • TypeDesk Mount Kit
  • Supports monitors up to 34 inches and 22 pounds
  • VESA 75x75mm and 100x100mm compatibility
  • Raises screen up to 18.3 inches with 13 inches lift
  • 360 degree rotation and 85 degree tilt range
  • Desk clamp fits surfaces 0.4 to 2.4 inches thick

Single monitor arm for screens up to 34 inches

The Ergotron LX Pro arm holds one display weighing 4 to 22 pounds and up to 3.6 inches deep. It attaches with a two-piece clamp that fits desks 0.4 to 2.4 inches thick. The mount supports VESA 75x75mm and 100x100mm patterns.

Lift range and desk thickness limits

The arm raises the screen 13 inches and positions it up to 18.3 inches above the worksurface. Tilt adjusts 85 degrees and the arm rotates 360 degrees. The included clamp only accepts desks between 0.4 and 2.4 inches thick; a grommet mount is sold separately as accessory 98-728-292.

Check VESA pattern and desk thickness before

Verify your monitor uses a 75x75mm or 100x100mm VESA pattern and weighs between 4 and 22 pounds. Measure your desk edge to confirm it falls within the 0.4 to 2.4 inch clamping range. If your desk is thicker or thinner, the supplied clamp will not fit.

Highlights

  • Supports monitors up to 34 inches and 22 pounds
  • VESA 75x75mm and 100x100mm compatibility
  • Raises screen up to 18.3 inches with 13 inches lift
  • 360 degree rotation and 85 degree tilt range
  • Desk clamp fits surfaces 0.4 to 2.4 inches thick

Specifications

BrandERGOTRON
TypeDesk Mount Kit

Questions about this item

Which monitor sizes and weights does the LX Pro Arm 45682292 support?

The arm fits single screens up to 34 inches diagonal, weighing 4 to 22 pounds and up to 3.6 inches deep, with VESA 75x75mm or 100x100mm patterns.

How high can the monitor sit above the desk once the arm is installed?

The arm raises the display up to 18.3 inches above the worksurface and provides 13 inches of vertical lift for seated or standing viewing.

What desk thicknesses does the included clamp accept?

The two-piece desk clamp attaches to surfaces 0.4 to 2.4 inches thick; a grommet mount is available separately as accessory 98-728-292.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.