We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
eOUTIL DL136 10 inch digital inclinometer with magnetized V-groove base and LED display

eOUTIL DL136 10 Inch Digital Inclinometer IP65

SKU CH-QB4X-KDXQX MPN DL136

A 254 mm digital inclinometer with IP65 protection, 4×90° range and 0.05° resolution on a magnetised V-groove base

  • Measures 4 × 90° with ±0.1° precision at level and plumb
  • Resolution 0.05° across degrees, percent, mm/m and IN/FT
  • IP65 aluminium frame with magnetised V-groove base for metal surfaces
  • Stores eight readings and recalls them instantly
  • Audible beep at 0° and 90° plus hold button freezes display

What this inclinometer does

The eOUTIL DL136 is a 10 inch digital inclinometer built for tradespeople who need to measure angles on metal surfaces. Its magnetised V-groove base clamps firmly to pipe or flat steel, and the IP65 rating means the tool survives dust and water on site. The green LED display stays readable in bright or dim conditions and flips automatically when the unit is turned upside down.

Sustained job-site reliability

The aluminium frame and sealed electronics keep the instrument working through long shifts without drift. Memory stores eight readings so you can move between cuts without losing reference angles. The audible buzzer confirms level and plumb without forcing you to watch the screen, and the hold button freezes the value while you mark the workpiece.

Measurement limits you can trust

The display covers four 90° quadrants with a resolution of 0.05°. Accuracy is ±0.1° at 0° and 90°, widening to ±0.2° at other angles. Units switch between degrees, percent, mm/m and inches per foot, and the REF button toggles absolute and relative modes at any position.

Highlights

  • Measures 4 × 90° with ±0.1° precision at level and plumb
  • Resolution 0.05° across degrees, percent, mm/m and IN/FT
  • IP65 aluminium frame with magnetised V-groove base for metal surfaces
  • Stores eight readings and recalls them instantly
  • Audible beep at 0° and 90° plus hold button freezes display

Specifications

No published specifications for this item yet.

Questions about this item

How does the DL136 handle heat or power during all-day use on site?

The DL136 has no moving parts or active cooling; it runs on a standard battery and the aluminium frame stays at ambient temperature during continuous measurement.

What must I already own for the DL136 to work out of the box?

A compatible button-cell battery is required; the level includes a magnetised V-groove base and carry bag so no extra mounting hardware is needed.

Can the DL136’s 0.1° precision at 0° and 90° complement my older spirit level on the same job?

Yes — the digital readout resolves to 0.05° and stores eight readings, letting you cross-check the spirit vial quickly without removing either tool from the work surface.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.