We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular outdoor wireless bridge unit with two integrated panel antennas and mounted PoE injector housing

eoqo

eoqo 2 in 1 Accessory Wireless Bridge 5.8GHz 14dBi 100Mbps 24V PoE

SKU CH-K9WV-T40PB

A 5.8 GHz wireless bridge with 14 dBi antennas extends networks up to 3 km at 100 Mbps and includes two 24 V PoE injectors

  • Extend network up to 3 km with 5.8 GHz link
  • 14 dBi antennas boost signal strength over distance
  • Two 24 V PoE injectors combine power and data
  • Dual 100 Mbps LAN ports connect wired devices directly
  • Outdoor-rated build withstands weather for permanent install

Rural long-range link

The eoqo 2 in 1 Wireless Bridge creates a point-to-point connection up to 3 kilometres away on the 5.8GHz band. It suits farms, remote sites and Starlink Gen 3 users who need to extend service to outbuildings. Two 14dBi directional antennas focus the signal for stable throughput where cable runs are impractical.

Thermals and power

Outdoor-rated housing handles temperature swings and moisture without active cooling, so the unit runs silently. Each end draws power through a supplied 24V PoE injector, letting a single Ethernet cable carry both data and electricity. The link tops out at 100Mbps, keeping power draw low and predictable.

Mounting and daily use

Pole-mount brackets let you aim the antennas precisely for the clearest line of sight. Two 100Mbps LAN ports on each radio give a spare jack for a switch, camera or second device without extra hardware. The package includes both injectors and a splitter, so the only extra you need is standard Ethernet cable.

Highlights

  • Extend network up to 3 km with 5.8 GHz link
  • 14 dBi antennas boost signal strength over distance
  • Two 24 V PoE injectors combine power and data
  • Dual 100 Mbps LAN ports connect wired devices directly
  • Outdoor-rated build withstands weather for permanent install

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the wireless bridge and what is the common mistake with the 24V PoE injectors?

Mount the two units facing each other, connect each to its 24V PoE injector with a single Ethernet cable, then plug the injectors into power; the step often missed is reversing the injector’s LAN and PoE ports, which sends no power to the radio.

What maintenance or replacement will the 14dBi antennas and PoE injectors need later?

Inspect the antenna radomes and mounting brackets annually for corrosion or storm damage; replace any cracked radome or failed 24V PoE injector to keep the link stable.

What limit appears first on the 100Mbps Ethernet ports during sustained 5.8GHz use?

The 100Mbps wired ports cap throughput before the 5.8GHz radio does, so continuous traffic maxes out at 100Mbps even if the wireless link could carry more.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.