We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 1.75 mm PETG filament spool, vacuum-sealed, 2.2 lb

EONO3D PETG Filament 1.75mm Black 1kg

SKU CH-ZPPB-2A1JF

1.75 mm PETG filament on a 2.2 lb spool, vacuum-sealed with ±0.02 mm tolerance for low stringing, strong layer adhesion and high impact resistance

  • Color1 Black Petg 1kg
  • MaterialPolylactic Acid
  • Diameter1.75
  • Weight2.2 pounds
  • Clean prints with minimal stringing from optimized melt flow
  • Strong, impact-resistant parts tougher than standard PLA
  • Precise extrusion with ±0.02mm diameter tolerance
  • Ready-to-print spool vacuum-sealed with desiccant
  • Works on most 1.75mm FDM printers at 230260°C nozzle, 5070°C bed, 120180mm/s speed

EONO3D PETG Filament 1.75mm

EONO3D PETG filament is a 1.75mm material built for functional prints that need strength and durability. It suits makers, engineers and hobbyists producing brackets, enclosures, tools and prototypes on standard FDM 3D printers. The spool weighs 2.2 pounds and arrives vacuum-sealed with desiccant to preserve dryness.

Upgrade from standard PLA

PETG delivers superior toughness and impact resistance compared to standard PLA, making the jump worthwhile when parts must withstand stress, repeated use or higher temperatures. Low stringing and strong layer adhesion produce clean surfaces and reliable prints without the brittleness that limits PLA in mechanical applications.

1kg spool capacity and print window

The 1kg spool comfortably handles extended print sessions for medium to large functional parts across a wide range of machines. Recommended settings run at nozzle 230260°C, bed 5070°C and speed 120180mm/s with ±0.02mm dimensional accuracy ensuring stable flow. Moisture resistance reduces bubbling and surface defects, though very high-speed or high-temperature specialty prints may exceed the recommended window.

Highlights

  • Clean prints with minimal stringing from optimized melt flow
  • Strong, impact-resistant parts tougher than standard PLA
  • Precise extrusion with ±0.02mm diameter tolerance
  • Ready-to-print spool vacuum-sealed with desiccant
  • Works on most 1.75mm FDM printers at 230260°C nozzle, 5070°C bed, 120180mm/s speed

Specifications

BrandEONO3D
Color1 Black Petg 1kg
MaterialPolylactic Acid
Diameter1.75
Weight2.2 pounds

Questions about this item

What spool diameter and filament diameter will fit my printer?

The filament is 1.75mm diameter with ±0.02mm tolerance, supplied on a 1kg spool weighing 2.2 pounds, compatible with most 1.75mm FDM printers.

What nozzle and bed temperatures should I set, and what common step avoids bubbling?

Set the nozzle to 230260°C and bed to 5070°C; keep the vacuum-sealed bag closed until printing to prevent moisture absorption that causes bubbles.

When should I dry or replace the filament?

If prints show stringing, popping or poor layer adhesion, dry the spool at low heat; replace it when the 1kg supply is exhausted or diameter drifts beyond ±0.02mm.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.