Enpac
Enpac 7212-YE Cylinder Stand 2 Cyl 11-1/2in HDPE Welding
Holds two gas cylinders up to 12⅜ inches in diameter on a non-corrosive, non-sparking HDPE stand rated to 400 lb
- TypeWelding Parts & Supplies
- Holds two cylinders up to 12 3/8 in diameter with cinch straps
- Non-corrosive HDPE construction resists chemicals and eliminates spark risk
- Forkliftable base 28 in wide by 14 in deep for easy relocation
- Meets OSHA standards for safe gas-cylinder storage
- 400 lb capacity supports heavy industrial cylinders securely
Two-Cylinder Stand for 11-1/2 in. Diameter
The Enpac 7212-YE cylinder stand holds two cylinders with diameters from 3 in. to 12 3/8 in. using cinch-buckle straps. Made of non-corrosive, non-sparking polyethylene, it is coloured yellow and meets OSHA standards for welding environments. The unit is designed for wall mounting and includes upper straps for added security.
Load Behaviour at 400 lb. Capacity
Rated for 400 lb., the high-density polyethylene base resists deformation under sustained weight. The 14 in. by 28 in. footprint distributes load evenly across the floor or pallet. Forklift pockets allow relocation while cylinders remain strapped in place. The material does not corrode or produce sparks during prolonged industrial use.
Wall-Mount Installation and Common Issues
Four corners accept lag bolts for permanent wall attachment at 30 in. overall height. Installers sometimes find the 28 in. width too wide for narrow shop aisles. The cinch-buckle straps require periodic tension checks as vibration can loosen them over time. Ensure the mounting surface supports the full 400 lb. rating before loading cylinders.
Highlights
- Holds two cylinders up to 12 3/8 in diameter with cinch straps
- Non-corrosive HDPE construction resists chemicals and eliminates spark risk
- Forkliftable base 28 in wide by 14 in deep for easy relocation
- Meets OSHA standards for safe gas-cylinder storage
- 400 lb capacity supports heavy industrial cylinders securely
Specifications
| Brand | ENPAC |
|---|---|
| Type | Welding Parts & Supplies |
Questions about this item
Does the HDPE cylinder stand generate any noise or heat during all-day use?
The stand is a passive, non-powered rack made of high-density polyethylene, so it produces no noise, no heat and draws no electricity while holding cylinders.
What must I already have to secure two cylinders on this stand?
You need two gas cylinders with diameters between 3 in and 12 3/8 in; the stand includes integrated straps with cinch buckles for each cylinder, so no extra chains or clamps are required.
Will the 7212-YE stand fit against the same wall where my older 14 in deep bracket is mounted?
Yes — the base plate is 14 in deep and 28 in wide, matching common legacy wall brackets, and the unit is forkliftable for easy repositioning alongside existing equipment.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
