We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow open-head salvage drum, 30 gal, HDPE body and lid, screw-on closure, 6.35 mm wall thickness

Enpac

Enpac 1230-YE 30 gal Open Head Salvage Drum Yellow

SKU CH-AP5N-RGTX5

A 30 gal open-head salvage drum made from 6.35 mm polyethylene with a screw-on HDPE lid, rated UN 1H2/X100/S for solids

  • 30-gallon capacity handles large spill volumes
  • 35 mm wall thickness resists punctures and corrosion
  • UN 1H2/X100/S solids rating certifies hazardous-material transport
  • HDPE construction withstands chemicals and UV exposure
  • Screw-on lid provides secure, leak-tight closure

30 Gallon Open-Head Salvage Drum

The Enpac 1230-YE is a 30 gallon open-head salvage drum moulded from yellow polyethylene. Its screw-on lid uses an HDPE closing ring to seal the top opening. The drum body has a wall thickness of 6.35 mm and stands 30 in tall with a top outside diameter of 22 1/4 in. It carries a UN 1H2/X100/S rating for solid materials only.

Suited for solid containment, not liquid transport

This drum is rated UN 1H2/X100/S for solids, so it fits operations that must overpack damaged packages or hold dry hazardous waste. Facilities needing a UN liquid rating, a lined interior, or bung holes for pumping should select a different container. The unlined polyethylene construction also limits compatibility with certain aggressive chemicals that require a barrier coating.

Solid-wall construction resists deformation under

The uniform 6.35 mm wall thickness distributes vertical pressure evenly when drums are stacked during storage or transit. The HDPE lid and ring maintain a tight seal without gasket compression set that can appear in shorter bursts. Because the drum is unrated for liquids, sustained hydrostatic pressure from free liquids is not a design condition.

Highlights

  • 30-gallon capacity handles large spill volumes
  • 35 mm wall thickness resists punctures and corrosion
  • UN 1H2/X100/S solids rating certifies hazardous-material transport
  • HDPE construction withstands chemicals and UV exposure
  • Screw-on lid provides secure, leak-tight closure

Specifications

BrandENPAC

Questions about this item

What size lid opening does the 30 gal drum provide for loading?

The open-head design gives a full 22 1/4 in top outside diameter so you can place oversized items directly inside.

Will the HDPE screw-on lid seal against the 6.35 mm wall thickness without a gasket?

Yes, the HDPE closing ring threads onto the unlined polyethylene body and meets UN 1H2/X100/S for solid hazardous materials.

How do I verify the drum meets the UN solids rating after I close it?

Check that the yellow HDPE lid is fully engaged on the 30 in high body and the closure ring is hand-tight with no visible gaps.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.