EnGenius Technologies
EnGenius Technologies ACP12V2A power adapter 12V 2A 5.5x2.1mm
A 12 V 2 A power adapter with a 5.5 mm × 2.1 mm DC connector for EnGenius ECW220, ECW230, EWS357AP and EWS377AP access points
- Delivers steady 12 V 2 A power to compatible EnGenius access points
- Black 5.5 × 2.1 mm barrel connector fits listed ECW and EWS models
- Supports ECW220 and ECW230 indoor wireless access points
- Powers EWS357AP and EWS377AP outdoor access point units
- New EnGenius-branded adapter replaces lost or damaged original supply
Compatible Access Point Power Adapter
The EnGenius Technologies ACP12V2A is a 12V 2A power adapter built for specific wireless access points. It delivers stable DC power through a 5.5mm by 2.1mm black pin connector. This unit is designed as a direct replacement or spare for supported EnGenius hardware.
Suits ECW and EWS Access Point Owners
This adapter suits administrators maintaining ECW220, ECW230, EWS357AP or EWS377AP access points. It is not suitable for devices requiring a different voltage, current rating or connector polarity. Buyers needing power for other brands or models should look elsewhere.
12V 2A Output for Listed Models
The 12V 2A output comfortably handles the power draw of the compatible access points listed above. It provides adequate headroom for normal operation of these specific units. The adapter runs out of capacity if connected to hardware demanding higher voltage or amperage than specified.
Highlights
- Delivers steady 12 V 2 A power to compatible EnGenius access points
- Black 5.5 × 2.1 mm barrel connector fits listed ECW and EWS models
- Supports ECW220 and ECW230 indoor wireless access points
- Powers EWS357AP and EWS377AP outdoor access point units
- New EnGenius-branded adapter replaces lost or damaged original supply
Specifications
| Brand | EnGenius |
|---|---|
| Shipping weight | 0.45 kg |
| Package size | 109 × 84 × 56 mm |
Questions about this item
Which EnGenius access points are confirmed to work with this 12 V 2 A adapter?
The adapter is listed for the ECW220, ECW230, EWS357AP and EWS377AP models.
Will the 5.5 mm by 2.1 mm barrel plug fit the DC jack on my older EnGenius unit?
It fits only devices that accept a 5.5 mm outer diameter and 2.1 mm inner diameter centre-positive connector.
How can I verify the adapter is delivering the rated 12 V 2 A after I plug it in?
Measure the DC output with a multimeter; it should read 12 V under load and the access point should power up normally.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



