EnGenius Technologies
EnGenius ECW520 Cloud Managed Tri-Band Wi-Fi 7 Access Point
Cloud-managed tri-band Wi-Fi 7 access point covering up to 1,250 sq. ft. with 500+ device capacity and 2.5 GbE PoE+ power
- Dimensions6.22 x 6.22 x 1.38
- Weight1.32
- Cloud management scales to unlimited APs from a single app
- Tri-band Wi-Fi 7 reaches 5,800 Mbps on 6 GHz
- 5 GbE PoE+ port powers the unit and carries full throughput
- Covers 1,250 sq. ft. with capacity for 500+ devices
- WPA3 and WPA2-AES encryption secure every connection
Indoor Tri-Band Access Point
The EnGenius ECW520 is a cloud-managed indoor access point built for small to medium businesses adopting Wi-Fi 7. It supports tri-concurrent 802.11be operation across 2.4, 5, and 6 GHz bands to handle dense client environments.
Power over Ethernet Operation
The unit draws power exclusively through its single 2.5 GbE PoE+ port, so no AC adapter is included or required. This design simplifies placement in ceiling or wall locations where mains sockets are unavailable.
Cloud Management and Mesh
The EnGenius Cloud App enables remote monitoring, troubleshooting, and unlimited AP scaling from a single dashboard. Integrated Mesh Wireless Support extends coverage between nodes without extra cabling, while WPA3 and WPA2-AES authentication secure every connection.
Highlights
- Cloud management scales to unlimited APs from a single app
- Tri-band Wi-Fi 7 reaches 5,800 Mbps on 6 GHz
- 5 GbE PoE+ port powers the unit and carries full throughput
- Covers 1,250 sq. ft. with capacity for 500+ devices
- WPA3 and WPA2-AES encryption secure every connection
Specifications
| Dimensions | 6.22 x 6.22 x 1.38 |
|---|---|
| Weight | 1.32 |
Questions about this item
How do I mount the ECW520 and what is the one step installers often miss?
Mount the 6.22 x 6.22 x 1.38 inch unit to a ceiling or wall, then connect the single 2.5 GbE PoE+ port; the step often missed is that this model requires PoE+ and ships without an AC adapter.
What part will need attention or replacement after extended use?
The 2.5 GbE PoE+ Ethernet port and the internal tri-band radios (2.4, 5, and 6 GHz) are the primary components that may require service after heavy, long-term operation.
What is the first performance limit reached when the AP runs at full load continuously?
The aggregate 5,800 Mbps ceiling on the 6 GHz radio, 4,300 Mbps on 5 GHz, and 700 Mbps on 2.4 GHz, combined with the 2.5 GbE uplink, will saturate before the 500+ device capacity is reached.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



