We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Enfain Mini-SAS HD SFF-8644 to SFF-8088 SAS cable 2m

Enfain

Enfain Mini-SAS HD SFF-8644 to SFF-8088 SAS cable 2m

SKU CH-WSC0-MBZG7

Connects Mini-SAS HD SFF-8644 to SFF-8088 for 6 to 12 Gb/s SAS external storage links over two metres

Length 2m

  • Supports 12 Gb/s bandwidth for fast data transfer
  • Compliant with SAS 3.0 signal specifications for reliable connectivity
  • High-density SFF-8644 connector enables 11 mm port spacing
  • Connects SFF-8644 to SFF-8088 for server external storage
  • 2 m length suits rack-to-rack or enclosure links

External SAS cable for server storage

The Enfain Mini-SAS HD cable links an SFF-8644 port to an SFF-8088 port over a two-metre run. It is built for external hard-disk connections in servers and storage arrays that use the SAS interface. The assembly follows the SFF-8644 external specification and supports the 6 Gb/s to 12 Gb/s signal range defined by SAS 2.1 and SAS 3.0 standards.

Suited to administrators wiring external drive

This cable fits installations where a controller or backplane presents an SFF-8644 Mini-SAS HD connector and the target enclosure uses the legacy SFF-8088 interface. It does not serve internal chassis wiring that requires SFF-8643 endpoints, nor does it address setups needing 1X2 or 1X4 multi-lane breakout configurations.

Deciding spec: connector pair SFF-8644 to SFF-8088

The single determinant is whether your hardware exposes exactly this connector combination. Port density on the Mini-SAS HD side is 11 mm pitch, compared with 19.01 mm on the prior generation, so adjacent ports sit closer together. Verify the mating faces before ordering.

Highlights

  • Supports 12 Gb/s bandwidth for fast data transfer
  • Compliant with SAS 3.0 signal specifications for reliable connectivity
  • High-density SFF-8644 connector enables 11 mm port spacing
  • Connects SFF-8644 to SFF-8088 for server external storage
  • 2 m length suits rack-to-rack or enclosure links

Specifications

No published specifications for this item yet.

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I pick a different length or connector style for my setup?

This cable is a 2-metre Mini-SAS HD SFF-8644 to SFF-8088 assembly; choose it when you need exactly that length and those two connector types.

What does the 12 Gb/s bandwidth mean once the cable is installed in a server?

It supports SAS 3.0 speeds up to 12 Gb/s per lane, so external drive enclosures or JBODs connected through the SFF-8088 end can run at full SAS 3.0 throughput.

Which SAS standard does the SFF-8644 to SFF-8088 interface follow, and what does it limit in practice?

The cable meets SFF-8644 and SFF-8088 specifications and complies with SAS 2.1 and SAS 3.0 signal requirements, capping each lane at 12 Gb/s.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.