EN-Labs
EN-Labs USB 3.1 Gen 2 Type C Cable 10Gbps 4K 60Hz PD 100W 3.3FT
A 3.3 ft USB-C to USB-C cable delivering 10 Gbps data, 4K 60 Hz video and up to 100 W power delivery
- Cable Length3.3FT / 1 meter
- Connector Number2
- Connector DetailUSB-C Male
- Terminal GenderUSB-C Male
- Speed4K Ready
- FeaturesUSB 3.1 Gen 2 USBC to USBC cable offers 10Gbps 2x the data t
- Transfers data at 10Gbps with USB 3.1 Gen 2
- Delivers 4K 60Hz video to compatible monitors via DP ALT Mode
- Powers devices up to 100W with USB Power Delivery
- Connects USB-C displays like ASUS MX72CU and LG UltraFine
- 3 ft length suits desktop and portable setups
What this cable does
The EN-Labs USB 3.1 Gen 2 Type C cable connects two USB-C devices for data, video and power. It carries up to 10Gbps when both ends support Gen 2, and delivers 4K 60Hz display output when the host and monitor implement DP ALT Mode. The cable is rated for 100W power delivery at 5A across 5V, 9V, 12V, 15V and 20V profiles. It suits users linking a laptop to a USB-C monitor or docking station, or attaching a Gen 2 external SSD enclosure.
Sustained-load behaviour
At full 10Gbps throughput the cable maintains signal integrity over its 3.3FT length without the throttling seen on longer passive runs. The 5A current path stays within safe thermal limits during continuous 100W charging sessions. Video streams at 3840x2160 60Hz remain stable because the conductors meet the Gen 2 eye-diagram requirements. Buyers who need Thunderbolt 3 or 4 bandwidth, or lengths beyond one metre for high-speed data, cannot rely on this passive design.
Installation notes
Plug the male USB-C connectors into each port; orientation is reversible. The only common failure point is expecting 4K output from a host or display that lacks DP ALT Mode — no video will appear even though data and charging work. Ensure both devices explicitly support the alternate mode before troubleshooting the cable. No driver or firmware installation is required.
Highlights
- Transfers data at 10Gbps with USB 3.1 Gen 2
- Delivers 4K 60Hz video to compatible monitors via DP ALT Mode
- Powers devices up to 100W with USB Power Delivery
- Connects USB-C displays like ASUS MX72CU and LG UltraFine
- 3 ft length suits desktop and portable setups
Specifications
| Brand | En-Labs |
|---|---|
| Cable Length | 3.3FT / 1 meter |
| Connector Number | 2 |
| Connector Detail | USB-C Male |
| Terminal Gender | USB-C Male |
| Speed | 4K Ready |
| Features | USB 3.1 Gen 2 USBC to USBC cable offers 10Gbps 2x the data transfer rate of USB 3.0 when connecting a portable external hard drive enclosure with USB-C 3.1 USB C to C cable provides full 4K @ 60Hz video resolution and authentic audio transmission supporting. This USB Type-C Gen 2 Cable can connect a USB-C monitor and Ultra HDTV up to 3840x2160@60Hz,such as ASUS MX72CU,LG UltraFine and Lenovo X1 etc. USB C to C Cable built in E-Mark chipset,support PD charger 5V/9V/12V/15V/20V@ 5 Amp, which is ensured by high-speed safe charging. NOTE: The DisplayPort Alternate(aks DP ALT mode) Mode i |
Questions about this item
Does the EN-Labs USB 3.1 Gen 2 cable get warm during sustained 10Gbps transfers or 100W charging?
The cable is rated for 10Gbps data and up to 100W power delivery using 20V at 5A, so it handles continuous high-load use without overheating.
What must my laptop and monitor both support for 4K 60Hz video over this cable?
Both the source device and the display need DisplayPort Alternate Mode over USB-C; the cable carries the signal up to 3840x2160 at 60Hz once that requirement is met.
Will this cable work at full 10Gbps speed with my older USB 3.0 Type-C SSD enclosure?
It will connect and function, but the link will negotiate down to USB 3.0 speeds because the enclosure limits the maximum data rate.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
microMICR Corporation imaging unit for Lexmark MS310 MS410 MS510 MS610 BK
- Yes



