We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black SAS cable with SFF-8088 male connectors on both ends, 3.3ft long

EN-Labs

EN-Labs SFF8088MM1M SAS cable SFF-8088 male to male 3.3ft 4 lane

SKU CH-7CRW-GF7TM

A 3.3 ft four-lane SAS cable with SFF-8088 male connectors on both ends, supporting 24 Gbps total throughput

  • TypeSAS Cable
  • Length3.3ft/1 Meter
  • Connector Number2
  • SpecificationsConnector A: Mini SAS 26pin (SFF-8088) Connector A: Mini SAS
  • FeaturesMini SAS Cable is designed for the connection of SAS devices
  • High-speed 24 Gbps aggregate throughput with four 6 Gbps lanes
  • Secure latch-equipped SFF-8088 connectors prevent accidental disconnection
  • Durable die-cast zinc connector housings withstand repeated mating cycles
  • One-metre length suits typical rack and enclosure spacing
  • Connects SAS controllers, drives and SAN storage arrays

External SAS Cable 1m 4-Lane

This one-metre EN-Labs cable carries four lanes of SAS traffic between two SFF-8088 ports. Each lane runs at 6 Gbps for a total of 24 Gbps. The 26-pin plugs feature a release ring that locks the connection and resists accidental disconnection. It is built for external controller-to-enclosure links in servers and workstations.

Suited for external storage arrays

Administrators wiring JBODs, tape libraries or SAN shelves to a RAID controller will find the length and latch useful. It is not for internal backplane cabling or any build that needs an internal mini-SAS connector. Buyers who need longer reach or a different pin count should look elsewhere.

Four-lane 6 Gbps per lane throughput

The aggregate 24 Gbps bandwidth is the figure that decides whether the cable matches the controller and enclosure spec. Verify that both ends use SFF-8088 and that the link speed requirement is 6 Gbps per lane before ordering.

Highlights

  • High-speed 24 Gbps aggregate throughput with four 6 Gbps lanes
  • Secure latch-equipped SFF-8088 connectors prevent accidental disconnection
  • Durable die-cast zinc connector housings withstand repeated mating cycles
  • One-metre length suits typical rack and enclosure spacing
  • Connects SAS controllers, drives and SAN storage arrays

Specifications

BrandEn-Labs
ModelSFF8088MM1M
TypeSAS Cable
Length3.3ft/1 Meter
Connector Number2
SpecificationsConnector A: Mini SAS 26pin (SFF-8088) Connector A: Mini SAS 26pin (SFF-8088) Data transfer speed: 6Gbps/lane, total 24Gbps Cable Length:3.3 FT / 1.0M Cable Color: Black.
FeaturesMini SAS Cable is designed for the connection of SAS devices such as controllers, hard drives, SAN storage area network to provide a high-performance data transfer.It is a perfect choice for networks, servers, workstations, External Storage Systems and more. Mini SAS 26Pin SFF 8088 to SFF 8088 cable can provide a super fast data transferring speed up to 6Gbps each lane, total up to 24Gbps,and backwards compliant with 3Gbps SAS protocol. The Serial Attached SCSI Cable is designed with latch to make sure the connector will be connected tightly,effectively prevent from accidental discon

Questions about this item

Does the 3.3 ft cable length limit where I can place my SAN storage relative to the server?

At 1.0 m the cable reaches adjacent racks or shelves but not distant cabinets; plan device placement within that distance.

What bandwidth ceiling appears first when the link runs continuously at 6 Gbps per lane?

The four-lane SFF-8088 interface caps sustained throughput at 24 Gbps total, so the bus itself is the first bottleneck.

Will the die-cast zinc connectors add noticeable heat or power draw during all-day operation?

The passive cable draws no power and generates no measurable heat; the zinc housings only improve durability and latch retention.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.