We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Red 3.3ft internal Mini SAS SFF-8087 to four SFF-8482 cables with Molex power leads

EN-Labs

EN-Labs SFF80874xSAS84821M Mini SAS SFF-8087 to 4x SFF-8482 SAS Cable 3.3ft Red

SKU CH-YYT1-RNJJK

Connects a Mini SAS 36Pin SFF-8087 controller to four SAS 29pin SFF-8482 drives with integrated Molex power over a 3.3ft red cable

  • Typeinternal mini SAS
  • Colorred
  • Length3.3ft / 1m
  • Connector Number9
  • SpeedSide 1: Mini SAS 36Pin (SFF-8087) Male with Latch Side 2:4 x
  • FeaturesDIY or pro installers require a forward fan-out cable with a
  • Connect RAID controller to four SAS drives via SFF-8087 host port
  • Each SFF-8482 target connector includes integrated Molex 4-pin power cable
  • 3 ft length suits internal SAN or DAS expansion builds
  • Forward fan-out design splits one 36-pin mini SAS into four 29-pin SAS links
  • Compatible with LSI 9207-8i, Adaptec 6405E and HP Smart Array P410 controllers

SFF-8087 to 4x SFF-8482 fan-out cable

This 3.3ft red cable links a single SFF-8087 36-pin host connector to four SFF-8482 29-pin SAS targets, each with an integrated Molex 4-pin power lead. It is built for DIY or professional installers expanding Storage Area Network or Direct Attached Storage capacity. The forward fan-out design connects a RAID controller or HBA directly to four SAS hard drives.

Capacity and headroom

The assembly provides four discrete data and power channels from one controller port, supporting configurations that populate up to four drive bays. It runs out when the host controller lacks an SFF-8087 interface or when the backplane requires a different target connector type. The fixed 3.3ft length also limits routing options in larger chassis.

Thermals noise and power draw

As a passive copper assembly, the cable generates no audible noise and adds negligible heat to the system. Power for the attached drives is supplied through the included Molex 4-pin tails, drawing from the host power supply rather than the data link. Normal use imposes no additional thermal load on the controller card.

Highlights

  • Connect RAID controller to four SAS drives via SFF-8087 host port
  • Each SFF-8482 target connector includes integrated Molex 4-pin power cable
  • 3 ft length suits internal SAN or DAS expansion builds
  • Forward fan-out design splits one 36-pin mini SAS into four 29-pin SAS links
  • Compatible with LSI 9207-8i, Adaptec 6405E and HP Smart Array P410 controllers

Specifications

BrandEN-Lab
ModelSFF80874xSAS84821M
Typeinternal mini SAS
Colorred
Length3.3ft / 1m
Connector Number9
SpeedSide 1: Mini SAS 36Pin (SFF-8087) Male with Latch Side 2:4 x SAS 29pin SFF-8482 with 7 inches molex 4pin power cable Cable Length:3.3ft / 1M Cable Color: Red
FeaturesDIY or pro installers require a forward fan-out cable with an internal mSAS connector when expanding storage needs for Storage Area Network (SAN) or Direct Attached Storage (DAS) applications; Internal MINI SAS DATA + POWER cable connects a SAS controller to 4 separate SAS HDD drives; Forward fanout cable has 1x SFF 8087 Mini SAS host connector and 4x discrete SAS target hard drive SFF 8482 connectors SCSI CONTROLLER TO SAS cable provides internal computer connectivity between a Serial Attached SCSI controller card host and direct attached storage hard drives; 36 pin SFF-8087 Host co

Questions about this item

Will the SFF-8087 end connect to my LSI 9207-8i HBA?

Yes, the 36-pin SFF-8087 male connector with latch is designed for host controllers such as the LSI 9207-8i and other listed HBA cards.

How can I verify each drive link is active after installation?

Check the RAID controller BIOS or OS disk utility; each of the four SFF-8482 targets should appear as a separate SAS device when the cable is seated correctly.

Does the 3.3ft cable include power for the drives or do I need separate Molex leads?

Each of the four SFF-8482 connectors has an integrated 7-inch Molex 4-pin power tail, so no extra power cables are required for the drives.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.