We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black and blue internal Mini SAS SFF-8087 cable with four right-angle SATA connectors, 50 cm length

EN-Labs

EN-Labs SFF80874SATA50CM90 Mini SAS SFF-8087 to 4 x Right Angle SATA Cable 50cm 6Gb/s

SKU CH-54BA-DJ43G

Connects a Mini SAS SFF-8087 controller to four right-angle SATA drives at 6Gb/s over a 50cm cable

  • Typeinternal mini SAS
  • ColorBlack / Blue
  • Length1.64ft / 50CM
  • Connector Number5
  • Connector Detail1 x SFF-8087 to 4 X SATA (Right Angle 90 degree)
  • Speed6Gb/s
  • Connects a RAID or PCIe controller with an SFF-8087 port to 4 discrete SATA drives
  • Right-angle SATA connectors simplify routing in tight chassis spaces
  • Supports up to 6Gb/s data transfer rate per drive
  • 50 cm cable length with woven mesh sheath for easy routing
  • P1 to P4 markers provide easy identification after installation

Mini SAS SFF-8087 breakout cable

This internal cable connects a RAID or PCIe controller equipped with an SFF-8087 port to four discrete SATA drives. The 36-pin Mini SAS male plug splits into four right-angle SATA female connectors, each rated for 6Gb/s data transfer. A woven mesh sheath covers half the .5 metre length for easier routing, and P1 to P4 markers simplify drive identification after installation.

Verify controller port and drive orientation

Before ordering, confirm that your host bus adapter or RAID card presents a Mini SAS SFF-8087 male interface with a latch. The breakout end supplies four right-angle SATA 7-pin female sockets, so each target drive or backplane must accept a standard SATA data connector mounted at 90 degrees. Cable reach is 1.64 feet from the controller port to the furthest drive connector.

Passive design runs cool and silent

The assembly contains no active electronics, fans or power circuitry, so it adds no heat or audible noise to the chassis. Power for the attached drives is supplied separately through the drive power connectors on your backplane or power supply. The thin, flexible cable with partial mesh sleeving keeps airflow paths clear in dense storage enclosures.

Highlights

  • Connects a RAID or PCIe controller with an SFF-8087 port to 4 discrete SATA drives
  • Right-angle SATA connectors simplify routing in tight chassis spaces
  • Supports up to 6Gb/s data transfer rate per drive
  • 50 cm cable length with woven mesh sheath for easy routing
  • P1 to P4 markers provide easy identification after installation

Specifications

BrandEN-Lab
ModelSFF80874SATA50CM90
Typeinternal mini SAS
ColorBlack / Blue
Length1.64ft / 50CM
Connector Number5
Connector Detail1 x SFF-8087 to 4 X SATA (Right Angle 90 degree)
Speed6Gb/s
SpecificationsSide 1: Mini SAS 36Pin (SFF-8087) Male with Latch Side 2:4 x Right Angle SATA 7Pin female with latch Cable Length:1.64ft / 0.5M Cable Color: Black+Blue
FeaturesInternal Mini SAS SFF-8087 is a high-speed data storage interface designed for high-throughput and fast data access. Connects a RAID or PCIe controller with an SFF-8087 port to 4 discrete SATA drives; Mini SAS to SATA adapter provides reliable internal connectivity between a Serial attached SCSI controller card in a computer system and direct attached storage devices with a SATA connector Connect up to 4 SATA drives to span RAID controller arrays and share performance across two PCIe 2.0 x8 lanes with compatible host bus adapters; Supports up to 6Gbs data transfer rate per drive Wove

Questions about this item

What connectors are included and do I need any extra cables?

The cable has one SFF-8087 male connector with latch on one end and four right-angle SATA 7-pin female connectors with latches on the other. No additional cables are required for a direct controller-to-drive link.

The part number shows 50 cm and 1.64 ft — are both lengths the same cable?

Yes, 50 cm and 1.64 ft describe the identical 0.5 m cable length. Choose this length when the controller and backplane are close together inside the chassis.

The spec lists 6 Gb/s — what does that mean for each connected drive?

Each of the four SATA drives can transfer data at up to 6 Gb/s, matching the SATA 6 Gb/s standard supported by compatible RAID or HBA controllers.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.