EN-Labs
EN-Labs SATA22P40CM SATA 22-pin to 7-pin + Molex 4-pin combo cable 1.3 ft red
Combines 22-pin SATA data and power into a 7-pin data plus Molex 4-pin connector over 1.3 ft for SSD, HDD or CD-ROM drives
- TypeSATA Data and Power Combo Cable
- Length1.3ft
- Cable Length1.3 ft.
- FeaturesCost-effective solution for powering a SATA drive from an mo
- Powers SATA drives from Molex 4-pin PSU connectors avoiding upgrade cost
- 22-pin SATA to 7-pin data plus Molex 4-pin power in one cable
- Thin red cable design reduces clutter and improves case airflow
- 3 ft length suits tight drive bays and compact builds
- Connects SSD HDD or CD-ROM using single combo cable
Cable purpose and target use
This EN-Labs SATA22P40CM cable converts a SATA 22-pin connector into a 7-pin data link plus a Molex 4-pin power feed. It lets you run a SATA SSD, HDD or optical drive from a power supply that only offers Molex connectors, avoiding a PSU upgrade.
What to verify on your system
Check that your power supply has a free Molex 4-pin (LP4) connector and that the drive you are connecting uses a standard SATA 22-pin interface. The cable is 1.3 ft long, so confirm the routing distance inside your chassis before ordering.
Build integration
The thin red cable reduces clutter and improves airflow in tight server or desktop cases. It supplies both data and power through a single run, freeing up a SATA power header on the PSU while keeping the drive operational.
Highlights
- Powers SATA drives from Molex 4-pin PSU connectors avoiding upgrade cost
- 22-pin SATA to 7-pin data plus Molex 4-pin power in one cable
- Thin red cable design reduces clutter and improves case airflow
- 3 ft length suits tight drive bays and compact builds
- Connects SSD HDD or CD-ROM using single combo cable
Specifications
| Brand | En-Labs |
|---|---|
| Model | SATA22P40CM |
| Type | SATA Data and Power Combo Cable |
| Length | 1.3ft |
| Cable Length | 1.3 ft. |
| Features | Cost-effective solution for powering a SATA drive from an molex 4pin connection on the computer power supply, which eliminates the cost of a power supply upgrade for compatibility with SATA hard drives Features a thin cable design, which helps reduce clutter and increase airflow within the computer/server case, for optimum system performance Specification Connector A: SATA 22pin Data & Power Combo connector Connector B: 7 pin Serial ATA +1x Molex (LP4) Power Connector Cable length: 1.3ft color:Red |
Questions about this item
Does the package include only the 1.3 ft red combo cable or are any extra adapters supplied?
The box contains the single 1.3 ft red SATA 22-pin to 7-pin plus Molex 4-pin combo cable; no additional adapters are included.
When should I choose this 22-pin combo cable instead of a standard 7-pin data-only lead?
Choose this cable when your drive uses the 22-pin SATA connector and you need both data and power from a Molex 4-pin PSU output.
What does the 22-pin connector actually carry once the cable is fitted inside the case?
The 22-pin end delivers both the 7-pin data signal and 15-pin power to the drive, while the Molex 4-pin plug draws power from the PSU.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



