EN-Labs
EN-Labs SATA10UVBL90 10 inch SATA III 90 to 180 degree latch cable UV Blue
A 10 inch SATA III cable with a 90 degree to 180 degree latch design for secure drive connections up to 6.0 Gbps
- TypeSATA III
- Length6" - 10"
- Connector Number2
- Connector Detail1 x SATA to 1 x SATA
- Terminal GenderFemale to Female
- Specifications- Connector : 7-pin SATA 90 degree to 180 Degree latching Re
- Secure latch prevents accidental disconnects
- 90-to-180-degree angle eases routing in tight cases
- 0 Gbps SATA III bandwidth handles modern SSD speeds
- 26 AWG tinned copper conductors ensure clean signal integrity
- UL listed and RoHS compliant for safety and environmental standards
EN-Labs SATA10UVBL90 10 inch SATA cable
The EN-Labs SATA10UVBL90 is a 10 inch SATA III data cable designed to link a 2.5 or 3.5 inch drive to a motherboard or host controller. It suits builders upgrading storage and technicians who keep a spare for quick troubleshooting in tight chassis.
Sustained 6.0 Gbps throughput with shielding
The cable supports the SATA revision III maximum of 6.0 Gbps and remains backwards compatible with SATA I and II ports. Shielded 26AWG tinned copper conductors maintain signal integrity over the full length during continuous read or write workloads rather than only in short bursts.
90 to 180 degree latch connectors for tight routing
One end terminates in a 90 degree latching receptacle while the other is a straight 180 degree latch connector, both using the 7 pin L type key. The latches lock securely so vibration or cable movement cannot unseat the link, and the angled end eases routing behind drive cages or against motherboard heatsinks.
Highlights
- Secure latch prevents accidental disconnects
- 90-to-180-degree angle eases routing in tight cases
- 0 Gbps SATA III bandwidth handles modern SSD speeds
- 26 AWG tinned copper conductors ensure clean signal integrity
- UL listed and RoHS compliant for safety and environmental standards
Specifications
| Brand | En-Labs |
|---|---|
| Model | SATA10UVBL90 |
| Type | SATA III |
| Length | 6" - 10" |
| Connector Number | 2 |
| Connector Detail | 1 x SATA to 1 x SATA |
| Terminal Gender | Female to Female |
| Specifications | - Connector : 7-pin SATA 90 degree to 180 Degree latching Receptacle "L" Type key connector - Supports SATA revision III up to 6 Gbps - Backwards compatible with SATA I, II ports - Cable length is 10 inches, - 26AWG tinned copper conductors - UL listed and RoHS compliant |
| Shielding | Yes |
| Conductor | Copper Conductor |
| Features | The SATA 90 Degree to 180 Degree SATA III 6 Gbps Cable connects both newer SATA III and legacy SATA I, II drives to internal motherboards and host controllers. The straight connector has a latch to provide a secure connection in tight spaces. IT technicians always need a spare on hand as a troubleshooting tool. DIY gamers can quickly upgrade their computer for expanded storage. It is backed by a lifetime warranty and product support. |
| Style | 1 Angle |
Questions about this item
Does the 10 inch 26AWG cable generate noticeable heat during continuous use?
The 26AWG tinned copper conductors carry low-current SATA signals, so the 10 inch cable produces no measurable heat even when the drive runs all day.
What motherboard or host-controller port is required for the 90 to 180 degree latch connector to function?
A standard 7-pin SATA data port on the motherboard or host controller accepts both the 90 degree and 180 degree ends of this latch cable.
Will the 6.0 Gbps rated cable work reliably with a legacy SATA II drive I plan to keep?
Yes, the cable is backwards compatible with SATA I and II ports, so the older drive will operate at its native speed without errors.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115471BTC
In stock
