EN-Labs
EN-Labs SATA10BK90 10 inch SATA III 90° to 180° latch cable
A 10-inch SATA III cable with 90° to 180° angled connectors and a latch for secure drive connections at up to 6.0 Gbps
- TypeSATA III
- Length6" - 10"
- Connector Number2
- Connector Detail1 x SATA to 1 x SATA
- Terminal GenderFemale to Female
- Specifications- Connector : 7-pin SATA 90 degree to 180 Degree latching Re
- 90° to 180° angled connectors ease routing in tight cases
- Latching straight connector secures the link against accidental disconnects
- 10‑inch length keeps cable runs short for cleaner airflow
- 26 AWG tinned copper conductors support 6.0 Gb/s SATA III speeds
- UL listed and RoHS compliant for safety and environmental standards
What this cable does
The EN-Labs SATA10BK90 is a 10 inch SATA III data cable with a 90 degree connector on one end and a straight 180 degree connector on the other. It links SATA hard drives or SSDs to motherboards and host controllers at up to 6.0 Gbps. The latch on the straight end locks the connection in place.
Installing it and common issues
The 90 degree end fits tight drive bays where a straight plug would hit the case wall, while the latched straight end seats firmly on the board. Route the 26 AWG shielded cable so it does not kink sharply at the bend. A loose latch or a port limited to an older SATA revision will drop the link speed below the cable’s 6.0 Gbps rating.
Behaviour under sustained load
The copper conductors and shielding maintain the 6.0 Gbps signal during long file transfers or RAID rebuilds without the intermittent drops that cheaper unshielded cables can show. Transfer rate is still capped by the slowest device on the link, so a SATA I or II drive will not reach the cable’s maximum throughput.
Highlights
- 90° to 180° angled connectors ease routing in tight cases
- Latching straight connector secures the link against accidental disconnects
- 10‑inch length keeps cable runs short for cleaner airflow
- 26 AWG tinned copper conductors support 6.0 Gb/s SATA III speeds
- UL listed and RoHS compliant for safety and environmental standards
Specifications
| Brand | En-Labs |
|---|---|
| Model | SATA10BK90 |
| Type | SATA III |
| Length | 6" - 10" |
| Connector Number | 2 |
| Connector Detail | 1 x SATA to 1 x SATA |
| Terminal Gender | Female to Female |
| Specifications | - Connector : 7-pin SATA 90 degree to 180 Degree latching Receptacle "L" Type key connector - Supports SATA revision III up to 6 Gbps - Backwards compatible with SATA I, II ports - Cable length is 10 inches, - 26AWG tinned copper conductors - UL listed and RoHS compliant |
| Shielding | Yes |
| Conductor | Copper Conductor |
| Features | The SATA 90 Degree to 180 Degree SATA III 6 Gbps Cable connects both newer SATA III and legacy SATA I, II drives to internal motherboards and host controllers. The straight connector has a latch to provide a secure connection in tight spaces. IT technicians always need a spare on hand as a troubleshooting tool. DIY gamers can quickly upgrade their computer for expanded storage. It is backed by a lifetime warranty and product support. |
| Style | 1 Angle |
Questions about this item
How can I confirm the EN-Labs SATA10BK90 cable is working after installation?
The system should detect the connected SATA III drive at up to 6.0 Gbps and show no errors in the OS disk utility.
What comes in the box and what must I buy separately?
The package contains one 10 inch 90 degree to 180 degree SATA III data cable with a latch. No extra items are included.
Which version of this cable should I choose for a tight build?
The 90 degree to 180 degree angle with 26AWG tinned copper conductors fits confined spaces and supports SATA III 6.0 Gbps.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115432BTC
In stock
