EN-Labs
EN-Labs SATA III cable 10 inch 90 to 180 degree UV Green
A 10-inch SATA III data cable with a 90-to-180-degree angled connector and locking latch for secure drive connections
- TypeSATA III
- Length6" - 10"
- Connector Number2
- Connector Detail1 x SATA to 1 x SATA
- Terminal GenderFemale to Female
- Specifications- Connector : 7-pin SATA 90 degree to 180 Degree latching Re
- 6 Gbps throughput for fast drive performance
- 10-inch length with 90-to-180-degree angle fits tight builds
- Latching connector secures the link under vibration
- 26 AWG tinned copper conductors with shielding protect signal integrity
- UL listed and RoHS compliant for regulated environments
Cable purpose and audience
The EN-Labs SATA III cable links a hard drive or SSD to a motherboard or host controller. It suits system builders who need a short internal link and technicians who keep a spare for troubleshooting storage connections.
Signal integrity and shielding
The 10 inch cable uses 26AWG tinned copper conductors with shielding to support 6.0 Gbps SATA III speeds. Backwards compatibility with SATA I and II ports means it works in older systems without signal degradation.
Connector angles and latch
One end bends 90 degrees and the other runs straight at 180 degrees, letting the cable fit around tight drive bays or crowded headers. The straight connector includes a latch that locks in place so vibration does not loosen the connection.
Highlights
- 6 Gbps throughput for fast drive performance
- 10-inch length with 90-to-180-degree angle fits tight builds
- Latching connector secures the link under vibration
- 26 AWG tinned copper conductors with shielding protect signal integrity
- UL listed and RoHS compliant for regulated environments
Specifications
| Type | SATA III |
|---|---|
| Length | 6" - 10" |
| Connector Number | 2 |
| Connector Detail | 1 x SATA to 1 x SATA |
| Terminal Gender | Female to Female |
| Specifications | - Connector : 7-pin SATA 90 degree to 180 Degree latching Receptacle "L" Type key connector - Supports SATA revision III up to 6 Gbps - Backwards compatible with SATA I, II ports - Cable length is 10 inches, - 26AWG tinned copper conductors - UL listed and RoHS compliant |
| Shielding | Yes |
| Conductor | Copper Conductor |
| Features | The SATA 90 Degree to 180 Degree SATA III 6 Gbps Cable connects both newer SATA III and legacy SATA I, II drives to internal motherboards and host controllers. The straight connector has a latch to provide a secure connection in tight spaces. IT technicians always need a spare on hand as a troubleshooting tool. DIY gamers can quickly upgrade their computer for expanded storage. It is backed by a lifetime warranty and product support. |
| Style | 1 Angle |
Questions about this item
How do I install the 90-degree connector on a tight SATA port?
Align the L-key notch on the 90-degree plug with the port key, push straight in until the latch clicks, then route the cable toward the 180-degree end to avoid bending the 26AWG conductors sharply.
Will the latch or cable need replacement after repeated drive swaps?
The latch is moulded into the straight 180-degree connector and rated for normal installation cycles; the 26AWG tinned copper conductors and shielding are UL listed and RoHS compliant, so no scheduled replacement is required.
What limits sustained transfer speed on this 10-inch cable?
The cable supports SATA III up to 6.0 Gbps, but actual sustained throughput is capped by the slowest attached device — drive, controller or port — not by the 10-inch length or 26AWG conductors.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114999BTC
In stock
