We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular RGB hub with ten 4-pin ports and PMMA case

EN-Labs

EN-Labs PR12VRGB1X10 12V 4-pin RGB 10 Port Hub Splitter with PMMA Case

SKU CH-VA25-W3WWZ

A 12V 4-pin RGB hub splits one motherboard header into 10 ports and includes a 1.64ft extension cable

  • TypeRGB Hub
  • ColorBlack
  • Length1FT
  • Connector A12V RGB 4pin
  • Connector B12V RGB 4pin
  • Connector Number10
  • Controls 10 RGB devices from a single 12V header
  • PMMA case protects the hub from physical damage
  • Double-sided adhesive pad secures the unit inside the case
  • 64 ft extension cable reaches distant motherboard headers
  • Works only with 12V 4-pin AURA RGB components

12V RGB hub for ten devices

This 12V 4-pin RGB hub splits a single motherboard header into ten ports, letting builders run multiple LED strips, fans or coolers from one connector. It is designed for systems that use 12V AURA-style RGB lighting and need more outputs than the board provides.

Synchronous control under continuous use

All ten channels are driven together, so colours and effects stay in step across every attached device for as long as the system is powered. The hub simply passes the 12V signal through without active circuitry, so sustained load does not change its behaviour or introduce timing drift.

PMMA case with adhesive mounting

A transparent PMMA shell encloses the PCB, protecting the solder joints from accidental knocks during builds or upgrades. Double-sided adhesive on the underside lets you fix the hub to a flat surface inside the chassis, keeping cables tidy and the single 1.64ft extension cable routed cleanly to the motherboard header.

Highlights

  • Controls 10 RGB devices from a single 12V header
  • PMMA case protects the hub from physical damage
  • Double-sided adhesive pad secures the unit inside the case
  • 64 ft extension cable reaches distant motherboard headers
  • Works only with 12V 4-pin AURA RGB components

Specifications

BrandEn-Labs
ModelPR12VRGB1X10
TypeRGB Hub
ColorBlack
Length1FT
Connector A12V RGB 4pin
Connector B12V RGB 4pin
Connector Number10
FeaturesUpgrade version 10 way 12V RGB LED Splitter Hub with PMMA Case and double side adhesive for ASUS/MSI 12V 4pin LED controller The 4 pin RGB hub can extend any 12V RGB products simultaneously, while only taking up one RGB header on your motherboard. The 12V RGB hub is only compatible with 4pin 12V RGB headers or controllers. not connect to 5V ARGB components Extend the rare RGB interface on your motherboard up to 10 ports Allow you to Control more channels RGB fans and lightning synchronously 12V 4-pin AURA RGB Lighting extension cable include

Questions about this item

Does the 10-port 12V RGB hub generate noticeable heat or draw extra power when running all day?

The hub is a passive splitter with no active circuitry, so it adds negligible heat and only passes the power your 12V RGB devices already draw from the single motherboard header.

What must my motherboard already have for this 12V 4-pin RGB hub to work?

You need at least one free 12V 4-pin RGB header on the motherboard or a compatible 12V RGB controller; the hub cannot operate from a 5V ARGB header.

Can I mix older 12V RGB fans and LED strips on the 10 ports without sync issues?

Yes, every connected 12V 4-pin device receives the same signal from the single header, so older 12V RGB fans and strips will light in unison as long as they use the 12V 4-pin standard.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.