We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB 20-pin header to Type-C female adapter with PCI bracket, 50 cm cable

EN-Labs

EN-Labs PCIUSB20P2CF50CM USB 20-pin to Type-C female adapter with PCI bracket 50 cm

SKU CH-GQ9Q-S19ZW

Converts a motherboard 20-pin header to a USB 3.1 Type-C female port with a PCI bracket and 50 cm cable

  • TypeCable Connectors
  • Connector TypeUSB 20pin to Type-C Female w/ PCI bracket
  • ColorBlack
  • Cable Length1.64 ft. (0.50m)
  • Length1.64ft / 50CM
  • Connector Number2
  • Adds a front-panel USB-C port via internal 20-pin header
  • PCI bracket secures the adapter in a standard expansion slot
  • USB 3.1 Gen 1 delivers up to 5 Gbps data throughput
  • 50 cm cable reaches most motherboard headers without strain
  • Black finish matches typical case aesthetics

Motherboard 20-pin to USB-C adapter

This EN-Labs adapter connects an internal motherboard USB 20-pin header to an external USB 3.1 Gen 1 Type-C female port. It mounts through a standard PCI slot cover bracket for a secure rear-panel installation. The 50 cm cable length suits typical chassis layouts.

Passive signal conversion

The adapter carries USB 3.1 Gen 1 signals without active components, so it draws no additional power and produces no noise. Thermals are irrelevant because the device simply routes the existing header lanes through the bracket.

Sustained 5 Gbps throughput

Under continuous load the link maintains the rated 5 Gbps data rate as defined by the USB 3.1 Gen 1 specification. Performance is limited by the motherboard header implementation rather than the adapter itself.

Highlights

  • Adds a front-panel USB-C port via internal 20-pin header
  • PCI bracket secures the adapter in a standard expansion slot
  • USB 3.1 Gen 1 delivers up to 5 Gbps data throughput
  • 50 cm cable reaches most motherboard headers without strain
  • Black finish matches typical case aesthetics

Specifications

BrandEN-Lab
ModelPCIUSB20P2CF50CM
TypeCable Connectors
Connector TypeUSB 20pin to Type-C Female w/ PCI bracket
ColorBlack
Cable Length1.64 ft. (0.50m)
Length1.64ft / 50CM
Connector Number2
Speed5Gb/s
SpecificationsThe cable is motherboard 20pin header to USB3.1 type c adapter cable w/ standard PCI slot cover bracket Compatible with USB 3.1 Gen 1 specification, data transfer speed up to 5Gbps Cable length is 1.64ft / 50CM

Questions about this item

How do I connect the 20-pin header to my motherboard and secure the bracket without bending the pins?

Align the keyed 20-pin connector with the motherboard USB header, press straight down until seated, then fasten the PCI slot cover bracket to the case with a single screw.

Will the Type-C female port or the 50 cm cable need replacement after repeated plugging cycles?

The Type-C female port is rated for standard insertion cycles; the fixed 50 cm cable assembly has no user-serviceable parts and is replaced as a unit if damaged.

What throughput limit appears first when transferring large files continuously at 5 Gbps?

Sustained transfers are capped by the USB 3.1 Gen 1 5 Gbps interface; real-world throughput will hit that ceiling before cable length or connector resistance becomes a factor.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.