EN-Labs PCIE8PSPL8P20CM PCIe 8pin to 2 x 8pin(6+2) power splitter cord 8 inch
- PCIe 8pin to 2 x PC…
- Black & Yellow
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
EN-Labs
Six-inch 18 AWG cable splits one PCIe 8-pin into two 6+2 connectors for multi-GPU rigs
Cable Length 6 in.
This 6 inch splitter converts a single 8-pin PCIe output into two 8-pin (6+2) connectors using 18AWG copper wire. It is built for miners and multi-GPU builders who need extra graphics power leads without replacing the power supply. The cable carries 12VDC and measures 15 cm end to end. Connector colours may vary between batches.
Use it when your power supply lacks enough native PCIe connectors for a second or third card. The jump is worth it if the unit can deliver the combined load on that rail and you prefer a fixed 6 inch reach over a longer modular cable. No adapter or Molex conversion is required.
Builders with cramped chassis or rigid tubing runs benefit from the short length and direct 8-pin to dual 8-pin layout. It is not for systems that need longer cable routing, right-angle connectors, or a higher wire gauge than 18AWG. Buyers who want more than two additional connectors should look at a different solution.
| Brand | En-Labs |
|---|---|
| Model | PCIE8-2XPCIE8-15CM |
| Color | Black & Yellow |
| Length | 6 inch / 15CM |
| Cable Length | 8 in. |
| Connector Number | 3 |
| Features | Affordable solution for adding two extra PCI Express connectors to your existing 8-pin power supply Adds two extra 8 (6+2) pin PCIe graphics power connectors Compatible with nVidia SLI and ATI CrossfireX gaming/video cards Easily split a 8-pin PCI Express connector into two 8-pin PCI Express connectors Specifications Wire Gauge: 18AWG Copper Cable Length: 6 inches / 15CM Connector A: 1- 8pin PCIe Female Connector B: 2- 8-pin PCIe Male Voltage:12V DC Notice: Due different mass product batch,connector color in Black,Red,Blue will be sent randomly |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
The splitter is 15 cm long, so allow at least that much straight-line space between the power-supply 8-pin port and each graphics-card connector.
Each male end splits into a 6-pin block plus a 2-pin block; match the keyed shape on the card socket — reversing the 2-pin section is the common mistake.
Check the 18 AWG conductors whenever you reseat a GPU or after a heavy mining load cycle; replace the cord if insulation shows melting, cracking or discolouration.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?