EN-Labs
EN-Labs PCIE6PSPL8P20CM PCIe 6-pin to dual 8-pin (6+2) power splitter cable 8 in
Splits one PSU 6-pin PCIe connector into two 8-pin (6+2) GPU plugs using UL-listed 18AWG copper wire
- TypePCIe 6pin to Dual 8pin(6+2) power splitter cable
- Length8 inch
- Cable Length8 in.
- SpecificationsEn-Labs PCIE6PSPL8P20CM PCIe 6pin to 2 x 8pin Male to Female
- Connector APCIe 6pin Male
- Connector B2 x PCIe 8pin(6+2) female
- Splits one PSU 6-pin into two GPU 8-pin connectors
- 18 AWG UL-listed copper conductor carries high current safely
- 8 inch length keeps cable routing tidy inside the case
- Compatible with 6-pin and 8-pin graphics cards
- PCI Express 2.0 pin-out supports SLI and CrossFire configurations
Connector split and length
This 8-inch cable splits one PCIe 6-pin male connector from a power supply into two 8-pin (6+2) female connectors for graphics cards. It uses UL Listed 18AWG copper conductors and is sold as new. The short length suits compact builds or mining rigs where cards sit close to the PSU.
Builds that need two GPU power plugs from one
Builders with a power supply that has only a single 6-pin PCIe output but a graphics card requiring two 8-pin inputs can use this splitter. Systems that already provide enough native 8-pin connectors, or that need longer cable runs for full-tower cases, should look at something else.
PCI Express 2.0 output specification
Each 8-pin (6+2) output is rated to the PCI Express 2.0 power delivery standard. The cable therefore delivers the current defined by that specification through its 18AWG conductors.
Highlights
- Splits one PSU 6-pin into two GPU 8-pin connectors
- 18 AWG UL-listed copper conductor carries high current safely
- 8 inch length keeps cable routing tidy inside the case
- Compatible with 6-pin and 8-pin graphics cards
- PCI Express 2.0 pin-out supports SLI and CrossFire configurations
Specifications
| Brand | En-Labs |
|---|---|
| Model | PCIE6PSPL8P20CM |
| Type | PCIe 6pin to Dual 8pin(6+2) power splitter cable |
| Length | 8 inch |
| Cable Length | 8 in. |
| Specifications | En-Labs PCIE6PSPL8P20CM PCIe 6pin to 2 x 8pin Male to Female GPU Mining Power Supply Power Splitter Cable Connect one 6-pin PCI-Express from Power Supply, enjoy two 6/8-pin PCI Express 2.0 output to your latest graphics cards. Build in UL Listed 18AWG copper conductor ribbon cable Connector A - PCI-E 6pin Male Connector B - PCI-E 8pin(6+2) Female Cable Length - 8 inches / 20CM Compatible with all 6-pin or 8-pin graphics cards and is great for NVIDIA SLI cards (needs quad 6-pin PCI Express 2.0) or ATI CrossFire cards (requires dual 8-pin PCI Express 2.0). |
| Connector A | PCIe 6pin Male |
| Connector B | 2 x PCIe 8pin(6+2) female |
| Connector Number | 3 |
Questions about this item
One 6-pin to two 8-pin (6+2) — how do I decide which connector layout my build needs?
Use the single 6-pin male end at the power supply and plug each graphics card into one of the two 8-pin (6+2) female ends; the 6+2 design accepts both 6-pin and 8-pin GPU sockets.
What does the PCI Express 2.0 label on the outputs mean for power delivery in my system?
It identifies the connector generation used on the graphics cards; the cable itself carries whatever current the PSU 6-pin source and the 18AWG conductors can supply.
The cable is 8 inches — what does that length cap in a typical case?
The 8-inch / 20 cm reach limits the distance between the PSU 6-pin port and the two GPU power inputs, so plan routing for compact or mining chassis.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.0011546BTC
In stock
