EN-Labs
EN-Labs PCIE6PMM30CM PCIe 6-pin Male to Male internal power cable 30 cm 18 AWG
Connects GPU mining breakout boards with a 30 cm, 18 AWG PCIe 6-pin male-to-male cable
- TypeGPU power cable for mining
- Length1 feet / 30CM
- Cable Length1 ft.
- SpecificationsEn-Labs PCIE6PMM30CM PCIe 6pin Male to Male GPU Mining Power
- Connector APCIe 6pin Male
- Connector BPCIe 6pin Male
- PCIe 6-pin male-to-male link connects GPU to breakout board
- UL-listed 18 AWG copper conductor handles high mining current
- 30 cm ribbon cable keeps internal routing tidy
- Works with DPS-800GB, DPS-1200, PS-2751-5Q server supplies
- Compatible with PS-2112-5L, DPS-750RB, DL580 power units
30 cm PCIe 6-pin power cable
This internal cable carries auxiliary power between a mining breakout board and a graphics card. It is built for GPU mining rigs that use server-style power supplies such as the DPS-1200 or PS-2751 series. The 30 cm length keeps routing tidy inside a dense chassis.
UL-listed 18 AWG copper conductor
The cable uses 18 AWG copper wire that is UL listed for current-carrying capacity. Both ends terminate in PCIe 6-pin male connectors, so the link is a direct male-to-male run without adapters. This gauge and certification are the key specification for safe power delivery.
Fits DPS and PS-series mining supplies
Connect the cable from a compatible breakout board on supplies like the DPS-800GB, DPS-1200, PS-2751-5Q or HSTSN-PL12 to the graphics card. It frees the builder from sourcing custom pin-outs and eliminates the need for Molex-to-PCIe adapters. Not suited for builds that require 8-pin or 12-pin GPU connectors.
Highlights
- PCIe 6-pin male-to-male link connects GPU to breakout board
- UL-listed 18 AWG copper conductor handles high mining current
- 30 cm ribbon cable keeps internal routing tidy
- Works with DPS-800GB, DPS-1200, PS-2751-5Q server supplies
- Compatible with PS-2112-5L, DPS-750RB, DL580 power units
Specifications
| Brand | En-Labs |
|---|---|
| Type | GPU power cable for mining |
| Length | 1 feet / 30CM |
| Cable Length | 1 ft. |
| Specifications | En-Labs PCIE6PMM30CM PCIe 6pin Male to Male GPU Mining Power Supply Breakout Board Power Cable Build in UL Listed 18AWG copper conductor ribbon cable Connector A - PCI-E 6pin Male Connector B - PCI-E 6pin Male Cable Length - 30CM/ 1 feet Compatible with GPU Mining Power Supply Breakout Board for Mining power supply DPS-1200FB DPS-1200QB PS-2751-5Q HSTSN-PL12 DPS-700LB PS-2112-5L DPS-750RB DL580 etc. |
| Connector A | PCIe 6pin Male |
| Connector B | PCIe 6pin Male |
| Connector Number | 2 |
Questions about this item
How much current can the 18 AWG conductors carry in a mining rig?
The 18 AWG copper conductors are UL Listed and rated for typical GPU auxiliary power loads up to the connector limit.
What does the PCIe 6-pin male-to-male interface limit in practice?
Each connector delivers up to 75 W, so the cable caps total throughput at that level per end.
Will the 30 cm ribbon cable reach between a DPS-1200 breakout board and a graphics card in a standard case?
At 30 cm the flat ribbon is designed for tight breakout-board-to-GPU runs inside mining frames or compact chassis.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115509BTC
In stock
