We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

EN-Labs

EN-Labs PCIE6P28PSPL6020 PCIe 6-pin to dual 8-pin splitter cable 60 cm + 20 cm

SKU CH-60PE-5N8YD

A PCIe 6-pin to dual 8-pin splitter cable with 60 cm and 20 cm legs, using 18AWG copper conductors

  • TypePCIe power cable for mining
  • Length60CM+20CM
  • Cable Length1.96 ft. (0.60m)
  • SpecificationsWire Gauge: 18AWG Copper Total length 19.6 inch +8 inch PCIe
  • Connector APCIe 6pin male
  • Connector BPCIe 8pin(6+2) male

Cable Length 31 in.

  • Adds two 8-pin GPU connectors from one 6-pin PSU port
  • 18AWG copper conductors carry high current safely
  • 60 cm main lead plus 20 cm split tail reaches distant cards
  • Works with standard modular PSUs and mining breakout boards
  • Supports SLI and CrossfireX multi-GPU configurations

Purpose and fit

This cable splits a single PCIe 6-pin connector from a modular power supply into two 8-pin (6+2) connectors for graphics cards. It suits builders adding a second GPU to an SLI or CrossfireX setup or miners expanding a breakout board. It is not for systems that lack a spare 6-pin modular output or that require native 8-pin headers on the PSU side.

Build and daily use

UL-listed 18AWG copper conductors run through a 60 cm main lead and a 20 cm Y-split tail, giving 80 cm total reach. Male-to-male plugs lock securely into standard modular PSU ports and GPU sockets. The fixed wiring order follows the common PCIe 6-pin pinout, so no re-pinning is needed on compatible units.

Compatibility check

Verify that your modular PSU provides a free 6-pin PCIe port with the standard wire map; non-standard pinouts will not work. Confirm each graphics card accepts an 8-pin (6+2) plug and that the 60 cm main plus 20 cm split lengths reach your card positions. This cable draws all power from one 6-pin source, so the PSU rail must handle the combined load.

Highlights

  • Adds two 8-pin GPU connectors from one 6-pin PSU port
  • 18AWG copper conductors carry high current safely
  • 60 cm main lead plus 20 cm split tail reaches distant cards
  • Works with standard modular PSUs and mining breakout boards
  • Supports SLI and CrossfireX multi-GPU configurations

Specifications

BrandEn-Labs
ModelPCIE6P28PSPL6020
TypePCIe power cable for mining
Length60CM+20CM
Cable Length1.96 ft. (0.60m)
SpecificationsWire Gauge: 18AWG Copper Total length 19.6 inch +8 inch PCIe 6 pin to 8pin cable length is 23.6inch(60cm) PCIe 8pin to 8pin cable length is 8 inch(20cm) Connector A: 1- 6pin PCIe Male Connector B: 2- 8-pin PCIe Male
Connector APCIe 6pin male
Connector BPCIe 8pin(6+2) male
Connector Number3
FeaturesAffordable solution for adding two extra PCI Express connectors to your existing 6-pin equiped Modular Power Supply Adds two extra 6pin or 8pin PCIe graphics power connectors Compatible with nVidia SLI and ATI CrossfireX gaming/video cards Easily split a 6-pin PCI Express connector into two 8-pin PCI Express connectors Application for Coolermaster Silent 1200W Application for any standard wire map PCIe 6pin modular PSU Application for Mining Power Supply Breakout Board for Mining power supply DPS-1200FB DPS-1200QB PS-2751-5Q HSTSN-PL12 DPS-700LB PS-2112-5L DPS-750RB DL580 etc.

Other versions of this model

1 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What wire gauge and standard does the PCIe 6-pin to dual 8-pin splitter use?

The cable uses UL-listed 18AWG copper conductors for the PCIe power connections.

How long are the main and split sections of this 60 cm + 20 cm cable?

The main 6-pin to first 8-pin run is 60 cm and the Y-split to the second 8-pin is 20 cm.

Which connectors must be plugged in first when installing this splitter on a modular PSU?

Connect the single 6-pin male end to the PSU modular port before attaching the two 8-pin (6+2) male ends to the graphics card or mining board.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.