EN-Labs
EN-Labs PCIe 6pin to 2×8pin(6+2) Power Splitter Cord 6 inch 18AWG
Converts a single 6-pin PCIe connector into two 8-pin (6+2) outputs for graphics cards using 18AWG tinned copper wire
- TypeCable Splitters
- ColorMulti-Color
- Length6" - 10"
- SpecificationsWire Gauge: 18AWG Tinned Copper Cable Length: 6 inch Connect
- Connector Number3
- Terminal GenderMale to Female
- Converts a single 6-pin PCIe into two 8-pin(6+2) connectors
- 18AWG tinned-copper conductors carry 12V DC reliably
- 6-inch length keeps cable routing tidy inside the case
- Supports 6-pin or 8-pin graphics cards for SLI or CrossFire setups
- Male-to-female design plugs directly into PSU and GPU power inputs
PCIe 6-pin to dual 8(6+2)-pin splitter
This adapter converts a single 6-pin PCI-Express connector from a power supply into two 8-pin (6+2) PCIe female outputs. It is built for builders who need to feed two graphics-card power inputs from one 6-pin source. The 18 AWG tinned-copper conductors carry 12 V DC across a 6-inch run.
Capacity and headroom
The cord supports 6-pin or 8-pin graphics cards and suits NVIDIA SLI setups that require quad 6-pin PCI Express 2.0 connections or ATI CrossFire configurations needing dual 8-pin PCI Express 2.0 feeds. It cannot supply more current than the single 6-pin source provides, so total GPU draw must stay within that limit.
What the bundle changes
The package includes only the splitter cable itself; no extra adapters, software or mounting hardware are supplied. Builders gain a compact 6-inch link that reduces clutter inside tight cases while keeping the original power-supply cables intact.
Highlights
- Converts a single 6-pin PCIe into two 8-pin(6+2) connectors
- 18AWG tinned-copper conductors carry 12V DC reliably
- 6-inch length keeps cable routing tidy inside the case
- Supports 6-pin or 8-pin graphics cards for SLI or CrossFire setups
- Male-to-female design plugs directly into PSU and GPU power inputs
Specifications
| Brand | En-Labs |
|---|---|
| Model | PCIE6SPL28PIN6 |
| Type | Cable Splitters |
| Color | Multi-Color |
| Length | 6" - 10" |
| Specifications | Wire Gauge: 18AWG Tinned Copper Cable Length: 6 inch Connector A: 1 x PCIe 6pin Connector B: 2x 8-pin(6+2) PCIe female Voltage:12V DC |
| Connector Number | 3 |
| Terminal Gender | Male to Female |
| Features | Converts 6-pin PCI-Express to dual 8(6+2) pin PCI Express 2.0. It supports 6-pin or 8-pin graphics cards and is great for NVIDIA SLI cards (needs quad 6-pin PCI Express 2.0) or ATI CrossFire cards (requires dual 8-pin PCI Express 2.0). Connect one 6-pin PCI-Express from Power Supply, enjoy two 6/8-pin PCI Express 2.0 output to your latest graphics cards. |
Questions about this item
Will this 6-inch 18AWG splitter work with a power supply that only has a single 6-pin PCIe output for my older GPU?
Yes, the male 6-pin plugs into that supply output and the two 8-pin (6+2) female ends feed the graphics card, so one 6-pin source powers both connectors.
How can I verify the splitter is delivering stable 12 V DC after I connect it?
Check that the GPU powers on without throttling or shutdown under load; a multimeter on the 8-pin terminals should read 12 V on the yellow wires and ground on the black wires.
Does the package include any extra cables or adapters, or is it just the 6-inch 6-pin-to-dual-8-pin splitter?
Only the splitter itself is supplied — one 6-pin male to two 8-pin (6+2) female ends at 6 inches — no additional cables or adapters are included.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115473BTC
In stock
