EN-Labs
EN-Labs PCIe 6-pin Male to Male Internal Power Cable 50 cm 18AWG
A 50 cm PCIe 6-pin male-to-male cable with UL-listed 18AWG conductors for GPU mining power-supply breakout boards
- TypePCIe 6pin power cable for mining
- Length50CM/1.64 feet
- Cable Length1.64 ft. (0.50m)
- SpecificationsEn-Labs PCIE6PMM50CM PCIe 6pin Male to Male GPU Mining Power
- Connector APCIe 6pin Male
- Connector BPCIe 6pin Male
- UL Listed 18AWG copper conductor ensures safe power delivery
- 50 cm ribbon cable keeps GPU-to-board runs tidy
- PCIe 6-pin male both ends connects mining breakout boards directly
- Compatible with DPS-1200, DPS-800GB, PS-2751-5Q and similar units
- New condition guarantees factory-fresh reliability for continuous mining loads
PCIe 6-pin male-to-male cable for mining breakout
This EN-Labs cable carries 12 V power between a mining breakout board and a graphics card. Both ends terminate in standard PCIe 6-pin male connectors. The 50 cm length suits compact GPU spacing inside mining frames. UL-listed 18 AWG copper conductors handle the current required by supported server power supplies.
Builders wiring DPS-800GB, DPS-1200.
The pinout matches the listed server PSUs and HSTSN-PL12 breakout boards. Installers using consumer ATX power supplies or 8-pin PCIe ports will need a different cable. The fixed 50 cm reach also rules out builds where cards sit farther from the breakout board.
UL-listed 18 AWG copper conductor rating
This wire gauge sets the safe continuous current for each 6-pin connection. Verify that the GPU power draw stays within the 18 AWG limit before deploying multiple cards on a single rail.
Highlights
- UL Listed 18AWG copper conductor ensures safe power delivery
- 50 cm ribbon cable keeps GPU-to-board runs tidy
- PCIe 6-pin male both ends connects mining breakout boards directly
- Compatible with DPS-1200, DPS-800GB, PS-2751-5Q and similar units
- New condition guarantees factory-fresh reliability for continuous mining loads
Specifications
| Brand | En-Labs |
|---|---|
| Type | PCIe 6pin power cable for mining |
| Length | 50CM/1.64 feet |
| Cable Length | 1.64 ft. (0.50m) |
| Specifications | En-Labs PCIE6PMM50CM PCIe 6pin Male to Male GPU Mining Power Supply Breakout Board Power Cable Build in UL Listed 18AWG copper conductor ribbon cable Connector A - PCI-E 6pin Male Connector B - PCI-E 6pin Male Cable Length - 30CM/ 1 feet Compatible with GPU Mining Power Supply Breakout Board for Mining power supply DPS-1200FB DPS-1200QB PS-2751-5Q HSTSN-PL12 DPS-700LB PS-2112-5L DPS-750RB DL580 etc. |
| Connector A | PCIe 6pin Male |
| Connector B | PCIe 6pin Male |
| Connector Number | 2 |
Questions about this item
What gauge conductor limits current under sustained mining load?
The cable uses UL-listed 18AWG copper conductors, which set the safe continuous current capacity for the 6-pin PCIe connectors.
How much heat does the 50 cm ribbon cable produce when running all day?
The 18AWG copper ribbon generates minimal heat at rated load; its short 50 cm length keeps resistance low during continuous operation.
Which breakout board or PSU must I already own for the male-to-male plugs to work?
You need a mining breakout board or server PSU such as DPS-800GB, DPS-1200, PS-2751-5Q, HSTSN-PL12, DPS-700LB, PS-2112-5L, DPS-750RB or DL580 that provides a female PCIe 6-pin output.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115509BTC
In stock
