EN-Labs
EN-Labs Molex 4-pin to 2 x SATA 15-pin 90° Y Splitter 8 inch
An 8-inch Y-splitter converts one Molex 4-pin plug into two right-angled SATA 15-pin connectors for powering SATA drives
- TypeCable Splitters
- ColorMulti-Color
- Length6" - 10"
- SpecificationsType :SATA power splitter cable Length:8 inch Conductor:20AW
- Connector Number3
- Terminal GenderMale to Female
- Powers two SATA drives from one Molex connector
- 20AWG copper conductors deliver stable 12V and 5V power
- 90° angled SATA plugs fit tight drive bays
- 8 inch Y-splitter keeps cable routing tidy
- Supports SATA devices needing 12V and 5V rails
Molex-to-SATA power splitter
This 8-inch Y-splitter cable converts a single 4-pin Molex male connector into two 15-pin SATA female connectors. It uses 20AWG copper conductors to deliver 12V and 5V power to a pair of SATA devices. The 90-degree plug orientation helps routing in tight drive bays or behind motherboard trays.
Check your power supply and drives
Verify that your PSU has an available 4-pin Molex output before ordering. Ensure each target drive uses a standard 15-pin SATA power input and does not require a different voltage rail. The splitter draws both 12V and 5V from the same Molex source, so confirm your supply can handle the combined load of both devices.
Right-angle connectors aid cable management
The 90-degree SATA heads reduce the bend radius needed at the drive, letting cables lie flatter against the chassis. This keeps airflow paths clearer and eases side-panel closure in compact builds. No additional adapters, software or mounting hardware are included in the package.
Highlights
- Powers two SATA drives from one Molex connector
- 20AWG copper conductors deliver stable 12V and 5V power
- 90° angled SATA plugs fit tight drive bays
- 8 inch Y-splitter keeps cable routing tidy
- Supports SATA devices needing 12V and 5V rails
Specifications
| Type | Cable Splitters |
|---|---|
| Color | Multi-Color |
| Length | 6" - 10" |
| Specifications | Type :SATA power splitter cable Length:8 inch Conductor:20AWG Copper Connector A:Molex 4pin male Connector B:2 x SATA 15-pin Female Power supports:12V/5V SATA devices |
| Connector Number | 3 |
| Terminal Gender | Male to Female |
| Features | 2 way SATA power splitter adapter. This 8" Y-Splitter SATA power adapter cable plugs into a 4-pin Molex power plug and provides two 15-pin SATA power connectors for use with SATA drives and SATA power supplies. SATA power connectors provide a Slim profile and 5V & 12V voltage |
Questions about this item
What connectors come attached to the 8 inch Y-splitter and what extra cables are needed?
The splitter has a Molex 4-pin male plug on one end and two SATA 15-pin 90° female connectors on the other. No extra cables are required; it draws 12V and 5V directly from the PSU Molex output.
Which length and conductor gauge should I pick for a tight drive bay?
The cable is 8 inch long with 20AWG copper conductors. The short length and right-angle SATA heads keep routing tidy inside compact cases.
What does the 12V/5V rating mean when the splitter is powering two drives?
Each SATA 15-pin connector supplies both 12V and 5V rails to the attached drive, so two SATA devices can run simultaneously from a single Molex source.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114286BTC
In stock
