EN-Labs
EN-Labs Molex 4-pin Male to 2 x SATA 15-pin Female 8 inch Y Splitter Cable
Converts a Molex 4-pin plug into two 15-pin SATA power connectors using 20AWG copper over eight inches
- TypeCable Splitters
- ColorMulti-Color
- Length6" - 10"
- SpecificationsType :SATA power splitter cable Length:8 inch Conductor:20AW
- Connector Number3
- Terminal GenderMale to Female
- Powers two SATA drives from one Molex connector
- 20AWG copper conductor delivers reliable current
- 8 inch length fits compact drive bays
- Supports 12V and 5V SATA devices
- Y-splitter design adds drives without extra PSU cables
Molex to Dual SATA Power Splitter
This eight-inch Y-splitter cable converts a single four-pin Molex connector into two fifteen-pin SATA power connectors. It uses twenty AWG copper conductors and carries both twelve-volt and five-volt rails. The multi-colour wires help identify each rail during installation.
Builders adding SATA drives to older power supplies
Suitable for anyone needing to power two SATA hard drives or solid-state drives from an existing Molex lead. Not suited for builders whose power supply already provides native SATA connectors or who require more than two additional SATA power ports.
Eight-inch cable length
The fixed eight-inch length determines whether the splitter reaches the drive bays in a given chassis. Measure the distance from the Molex source to the furthest drive before ordering.
Highlights
- Powers two SATA drives from one Molex connector
- 20AWG copper conductor delivers reliable current
- 8 inch length fits compact drive bays
- Supports 12V and 5V SATA devices
- Y-splitter design adds drives without extra PSU cables
Specifications
| Type | Cable Splitters |
|---|---|
| Color | Multi-Color |
| Length | 6" - 10" |
| Specifications | Type :SATA power splitter cable Length:8 inch Conductor:20AWG Copper Connector A:Molex 4pin male Connector B:2 x SATA 15-pin Female Power supports:12V/5V SATA devices |
| Connector Number | 3 |
| Terminal Gender | Male to Female |
| Features | 2 way SATA power splitter adapter. This 8" Y-Splitter SATA power adapter cable plugs into a 4-pin Molex power plug and provides two 15-pin SATA power connectors for use with SATA drives and SATA power supplies. SATA power connectors provide a Slim profile and 5V & 12V voltage |
Questions about this item
How can I confirm the Molex-to-SATA splitter is delivering power correctly after connecting it?
After setup, each attached SATA drive should spin up and appear in the BIOS or operating system without errors.
What connectors are included and is anything else required to use the splitter?
The cable has one 4-pin Molex male connector and two 15-pin SATA female connectors; no extra parts are needed if your power supply has a free Molex plug.
Which length version of this splitter should I choose for a standard drive bay?
The 8 inch length fits typical internal drive-to-PSU routing in most chassis.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114286BTC
In stock
