We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Thin copper M.2 heatsink 70x20x1.5mm with pad and rings

EN-Labs

EN-Labs M.2 SSD Copper Heat Sink 70x20x1.5mm with Thermal Pad

SKU CH-PZ01-5W5DV

Pure copper heatsink measuring 70x20x1.5mm with thermal pad cools 2280 NVMe SSDs in laptops and tight spaces

  • Pure copper conducts heat at 401W/mk for faster cooling
  • 5mm slim profile fits laptops and tight spaces
  • Silicone thermal pad protects SSD components and extends drive life
  • Supports 2280 NVMe and NGFF M.2 SSDs
  • Three rubber rings included for secure mounting

Copper heatsink for 2280 M.2 SSDs

This pure copper heat sink measures 70x20x1.5mm and includes a thermal pad plus three rubber rings for mounting. It is designed to draw heat away from NVMe and NGFF solid-state drives that use the 2280 form factor. The 1.5mm thickness allows it to fit inside laptops and other space-constrained devices.

Suits tight laptop builds; not for larger drives

Builders fitting a 2280 drive into a thin notebook or compact desktop will appreciate the slim profile and copper construction rated at 401W/mk thermal conductivity. Users with 22110 or other oversized modules should look elsewhere because the 70x20mm footprint will not cover those controllers. Anyone needing active cooling or a taller heatsink for a desktop motherboard shroud will also need a different solution.

Mounts directly on the controller

Place the supplied thermal pad between the drive and the heatsink, then secure the assembly with the three rubber rings. No screws or adhesives are required, so installation works on boards that lack dedicated M.2 standoffs. The low 1.5mm height clears most motherboard armour and laptop chassis panels, leaving adjacent slots and memory modules unobstructed.

Highlights

  • Pure copper conducts heat at 401W/mk for faster cooling
  • 5mm slim profile fits laptops and tight spaces
  • Silicone thermal pad protects SSD components and extends drive life
  • Supports 2280 NVMe and NGFF M.2 SSDs
  • Three rubber rings included for secure mounting

Specifications

No published specifications for this item yet.

Questions about this item

Do I need my own M.2 2280 NVMe SSD to use this copper heatsink?

Yes, the 70×20×1.5 mm heatsink is designed for 2280-size NVMe and NGFF drives; you supply the drive and mount the included thermal pad and three rubber rings.

Will the 1.5 mm thickness clear older laptop motherboards that have tight clearance around the M.2 slot?

The 1.5 mm slim profile fits most notebooks and narrow spaces, but measure your SSD chip area first to confirm it matches the 70×20 mm footprint.

How can I verify the heatsink is transferring heat effectively after installation?

Monitor your SSD temperature under load; the pure copper body rated at 401 W/m·K should lower peak temperatures compared with running the drive bare.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.