EN-Labs
EN-Labs M.2 NVMe/NGFF Enclosure USB 3.2 Gen 2 10Gbps with 2×USB 2.0 Hub SD/TF Card Reader 2242/2260/2280
Tool-free M.2 NVMe and SATA enclosure with 10 Gbps USB 3.2 Gen 2, plus two USB 2.0 ports and an SD/TF card reader
- Tool-free SSD installation in seconds
- 10 Gbps NVMe speeds via USB 3.2 Gen 2
- Built-in 2-port USB 2.0 hub adds connectivity
- SD and TF card reader for quick media access
- Aluminium alloy shell with thermal pad for sustained performance
2-in-1 M.2 NVMe/SATA Enclosure with Hub
This enclosure combines an M.2 SSD bay, two USB 2.0 ports and an SD/TF card reader in one aluminium housing. It accepts M-key and B+M-key drives in 2242, 2260 and 2280 sizes, connecting to a host over USB 3.2 Gen 2 at up to 10 Gbps. Tool-free installation and bus power make it ready to use without extra cables or drivers.
Suits single-drive portable workflows.
The device fits users who want one NVMe or SATA SSD plus extra USB-A ports for peripherals. It does not serve buyers who need simultaneous SD and TF card access, because the reader uses one slot at a time. It also excludes anyone with a B-key M.2 PCIe AHCI SSD, mSATA drive, Wi-Fi card or capture card, as those are not supported.
10 Gbps USB 3.2 Gen 2 M.2 interface decides fit
The internal M.2 link runs at 10 Gbps, so an NVMe drive can approach its full sequential speed through this port. The two USB-A ports and the card reader both operate at USB 2.0 480 Mbps, which limits file transfers from cards or attached drives. Check that your SSD uses an M-key or B+M-key connector before buying.
Highlights
- Tool-free SSD installation in seconds
- 10 Gbps NVMe speeds via USB 3.2 Gen 2
- Built-in 2-port USB 2.0 hub adds connectivity
- SD and TF card reader for quick media access
- Aluminium alloy shell with thermal pad for sustained performance
Specifications
No published specifications for this item yet.
Questions about this item
Should I pick the 2242, 2260 or 2280 length for my SSD?
Choose the length that matches your drive — 2242, 2260 or 2280 mm — all three fit the adjustable slot.
What does the 10 Gbps rating mean once the enclosure is connected?
It is the peak bandwidth of the USB 3.2 Gen 2 link; real-world NVMe or SATA speeds will be lower due to protocol overhead and drive limits.
Which USB standard is used for the hub ports and card reader, and what does it cap?
Both the two USB-A ports and the SD/TF reader run at USB 2.0, capped at 480 Mbps, and the two card slots cannot operate simultaneously.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
