EN-Labs
EN-Labs KITPSUSW6PX106P 10-Port PCIe 6-Pin Breakout Board & Cable Kit
Distributes power to ten graphics cards through 6-pin PCIe connectors with included 50 cm cables, rated for supplies up to 1600 W
- TypePCIe Power Adapter Board w/ 6pin power cable kit
- Length50CM/19.7 inch
- Cable Length1.64 ft. (0.50m)
- SpecificationsEn-Labs KITPSUSW6PX106P 10 ports PCIe 6-pin GPU Mining Power
- Connector Number10
- 10-port breakout board powers up to 10 graphics cards from one supply
- Rated for 1600 W maximum load across all outputs
- Includes 10 UL-listed 18 AWG PCIe 6-pin male-to-male cables
- 50 cm cable length gives flexible routing inside the chassis
- Compatible with common-slot server PSUs such as DPS-800GB and DPS-1200FB
10-Port PCIe 6-Pin Breakout Kit
The EN-Labs KITPSUSW6PX106P provides a 10-port PCIe 6-pin breakout board with ten 18AWG male-to-male cables. It connects compatible server power supplies to multiple graphics cards for mining or compute workloads. The board includes solid-state capacitor filtering and supports a measured maximum of 1600W. Each cable measures 50 cm or 19.7 inches in length.
Suits builders using Common Slot server PSUs
This kit suits builders powering up to ten 6-pin graphics cards from a single compatible server unit such as the DPS-1200 or PS-2751-5Q models listed. It is not for users needing 8-pin or 12VHPWR connectors, nor for those running consumer ATX power supplies without the correct pinout. Buyers wanting more than ten ports or a different cable gauge should look elsewhere.
Check PSU compatibility and cable reach
Verify that your power supply appears in the supported model list including DPS-800GB, DPS-1200FB, PS-2751-5Q and others named in the data. Confirm the 50 cm cable length reaches your card mounting points inside the chassis. Ensure the total system draw stays within the 1600W board rating and that each 18AWG cable handles its assigned load.
Highlights
- 10-port breakout board powers up to 10 graphics cards from one supply
- Rated for 1600 W maximum load across all outputs
- Includes 10 UL-listed 18 AWG PCIe 6-pin male-to-male cables
- 50 cm cable length gives flexible routing inside the chassis
- Compatible with common-slot server PSUs such as DPS-800GB and DPS-1200FB
Specifications
| Brand | EN-Labs |
|---|---|
| Type | PCIe Power Adapter Board w/ 6pin power cable kit |
| Length | 50CM/19.7 inch |
| Cable Length | 1.64 ft. (0.50m) |
| Specifications | En-Labs KITPSUSW6PX106P 10 ports PCIe 6-pin GPU Mining Power Supply Breakout Board w/ 10pcs PCIe 6pin male to PCIe 6pin male power cable Measured maximum can support to 1600W power supply, 10 ports graphics card 6pin output. The Breakout Board have Solid state capacitor filter, suitable for a variety of server power supply. 10pcs UL Listed 18AWG PCIe 6pin male to male power cable include,able to withstand greater current and high power appliances, 50CM/19.7 inch in cable length, easy to use and connect This item is Compatible with GPU Mining Power Supply.Supported "Common Slot" Power |
| Connector Number | 10 |
Questions about this item
Which server power supply models will this breakout board accept?
The board is listed as compatible with DPS-800GB A, DPS-1200FB A, DPS-1200QB A, PS-2751-5Q, PS-2751-LF-1F, HSTSN-PL12, DPS-700LB D, PS-2112-5L and DPS-750RB A units.
Can I run ten graphics cards on a single 1200 W server PSU through this kit?
The board supports up to 1600 W total, so a 1200 W supply stays within that limit while feeding all ten 6-pin outputs.
How do I verify each GPU is receiving power after connecting the cables?
Check that every graphics card posts video and reports stable 12 V rails in monitoring software; the board’s solid-state capacitor filter helps deliver clean power to all ten ports.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



