EN-Labs
EN-Labs IDE2SATA890 Molex 4-pin to SATA 15-pin 90 degree 8 inches power adapter cord
Connects a Molex 4-pin power supply output to a right-angled SATA 15-pin drive using 20AWG copper over 8 inches
- TypePower
- ColorMulti-Color
- Length6" - 10"
- SpecificationsType :SATA power Adapter cable Length: 8 inches Conductor:20
- Connector Number2
- Terminal GenderMale to Female
- Connect SATA drives to legacy Molex power supplies
- 90-degree SATA connector fits tight drive bays
- 20AWG copper conductors deliver stable 12V/5V power
- 8-inch length suits compact desktop or server builds
- Supports both 2.5 and 3.5-inch SATA hard drives
What This Adapter Does
This EN-Labs IDE2SATA890 cable converts a standard Molex 4-pin male connector from a power supply into a SATA 15-pin female connector with a 90-degree profile. It uses 20AWG copper conductors and spans 8 inches, delivering 12V and 5V power to SATA hard drives or SSDs in desktop or server builds.
Who It Suits And Who It Does Not
Builders needing to power 2.5-inch or 3.5-inch SATA drives from older power supplies that only offer LP4 Molex outputs will find this adapter fit for purpose. Systems that require a straight-angle SATA power plug or a longer reach than 8 inches should look at alternative cables.
The Spec That Decides Fit
The 90-degree SATA 15-pin female connector determines whether the adapter clears tight drive bays or crowded backplanes; verify the orientation matches your chassis layout before ordering.
Highlights
- Connect SATA drives to legacy Molex power supplies
- 90-degree SATA connector fits tight drive bays
- 20AWG copper conductors deliver stable 12V/5V power
- 8-inch length suits compact desktop or server builds
- Supports both 2.5 and 3.5-inch SATA hard drives
Specifications
| Brand | En-Labs |
|---|---|
| Model | IDE2SATA890 |
| Type | Power |
| Color | Multi-Color |
| Length | 6" - 10" |
| Specifications | Type :SATA power Adapter cable Length: 8 inches Conductor:20AWG Copper Connector A:Molex 4pin male Connector B: SATA 15-pin Female Power supports:12V/5V SATA devices |
| Connector Number | 2 |
| Terminal Gender | Male to Female |
| Features | Provide power to your Serial ATA hard drive through a standard Molex connection from your power supply Ideal for desktop or servers that use Serial ATA Hard Drives. It enables connecting an internal SATA device to a power supply with only LP4 Molex connectors remaining. Compatible with both 2.5" and 3.5" Serial ATA Hard Drives allows the use of newer hard drives with older power supplies Provides 6 inches in cable length Connects a Serial ATA Hard Drive to a standard internal power connector SATA (15 pin) to 4 pin Molex (LP4) |
Questions about this item
Does the 90 degree SATA connector fit both 2.5 and 3.5 inch drives?
The right-angle 15-pin plug is designed to mate with standard SATA power ports on both 2.5 and 3.5 inch drives, so it works with either form factor.
What does the 12V/5V rating mean for my SATA device?
The adapter passes both 12 V and 5 V rails from the Molex source, supplying the voltages a SATA drive expects for its motor and logic circuits.
Will the 20AWG copper wire handle the current a SATA SSD or HDD draws?
20 AWG copper is rated for several amps, well above the typical draw of a SATA SSD or hard drive, so the cable will not limit power delivery.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115589BTC
In stock
