We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 20-inch daisy-chained cable with Molex 4-pin male to four SATA 15-pin 90-degree female connectors

EN-Labs

EN-Labs IDE24SATA24 Molex 4-pin to 4 SATA 15-pin 90-Degree Power Splitter Cable 20 inch

SKU CH-R17K-AF5TR

Converts a Molex 4-pin plug into four 90-degree SATA 15-pin power connectors for drives

  • TypeCable Splitters
  • ColorMulti-Color
  • Length21" - 25"
  • SpecificationsType :SATA power splitter cable Length:20 inch daisy chained
  • Connector Number5
  • Terminal GenderMale to Female
  • Powers four SATA drives from one Molex connector
  • 20 inch daisy-chained cable reaches multiple drive bays
  • 90-degree SATA plugs fit tight chassis spaces
  • 18AWG copper conductors deliver 12V and 5V reliably
  • Black finish keeps internal cabling neat

Molex to 4 SATA Power Splitter

This 20-inch daisy-chained cable converts a single Molex 4-pin male connector into four SATA 15-pin female connectors. It uses 18AWG copper conductors to deliver 12V and 5V power to SATA drives. The black 90-degree connectors suit tight internal routing.

Four SATA Connectors on One Lead

The splitter adds three extra SATA power ports without occupying additional power supply cables. Each 15-pin connector supports standard SATA hard drives, SSDs, and optical drives. The 90-degree orientation reduces strain on drive ports in cramped bays.

18AWG Wire and Daisy-Chain Length

The 18AWG copper limits total current across all four devices, so high-draw arrays may need separate power rails. The fixed 20-inch daisy chain restricts drive spacing and cannot be shortened or extended. Builders needing longer reaches or higher per-port current must use a different cable.

Highlights

  • Powers four SATA drives from one Molex connector
  • 20 inch daisy-chained cable reaches multiple drive bays
  • 90-degree SATA plugs fit tight chassis spaces
  • 18AWG copper conductors deliver 12V and 5V reliably
  • Black finish keeps internal cabling neat

Specifications

BrandEn-Labs
ModelIDE24SATA24
TypeCable Splitters
ColorMulti-Color
Length21" - 25"
SpecificationsType :SATA power splitter cable
Length:20 inch daisy chained
Conductor:18AWG Copper
Connector A:Molex 4pin male
Connector B:4 x SATA 15-pin Female
Power supports:12V/5V SATA devices
Connector Number5
Terminal GenderMale to Female

Questions about this item

Will the 18AWG copper conductors need replacement after extended use?

The 18AWG copper wires are rated for continuous 12V and 5V delivery; they do not degrade under normal operation and require no scheduled replacement.

What stops me from adding more drives to the four 15-pin SATA connectors on the daisy chain?

The single Molex 4-pin male source limits total current to what that rail can supply, so the combined draw of all attached drives must stay within that rail's capacity.

Does the 20-inch daisy-chained cable run hot or draw extra power when all four SATA devices are spinning?

The 18AWG copper handles the load without noticeable heat rise; the splitter itself adds no active circuitry, so power draw is only what the drives consume.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.