EN-Labs
EN-Labs IDE243PIN12V Molex 4-pin to 4×3-pin fan splitter 12 cm 26 AWG
- Cable Splitters
- Multi-Color
$4.99
0.00005979BTC
In stock
EN-Labs
EN-Labs IDE243PIN6 Molex 4-pin to 4×3-pin fan power splitter cable 6in 20AWG
Connects four 3-pin fans to one Molex power connector, with two 12 V and two 5 V headers for speed reduction
- TypeCable Splitters
- ColorMulti-Color
- Length6" - 10"
- SpecificationsType :Molex 4pin to 4 x 3pin fan power splitter cable Cable
- Connector Number5
- Terminal GenderMale to Male
Style 2X12V/2X5V
- 2X12V/2X5V
- 4X12V
- Connect four 3-pin fans from one Molex connector
- Two 12 V headers for full-speed cooling
- Two 5 V headers for quieter low-speed operation
- 20 AWG copper wire delivers reliable power
- Short 6 inch length keeps cable routing tidy
Four-fan Molex splitter for case cooling
This cable lets you run up to four 3-pin TX3 fans from one 4-pin Molex LP4 connector on the power supply. Two black headers deliver 12 V and two white headers deliver 5 V for reduced speed operation. It is aimed at builders who need extra case airflow without using motherboard fan headers.
Simple push-on fit with colour-coded headers
Each connector is a standard TX3 female socket that slides onto the fan pins; no tools or soldering are required. The 6-inch 20 AWG copper leads are short, so plan routing before you seat the Molex plug. A common mistake is plugging a 4-pin PWM fan into these 3-pin headers — the cable does not support 4-pin fans.
Check your PSU and fan connectors first
Verify that your power supply has a free Molex LP4 male connector and that every fan you intend to attach uses a 3-pin TX3 plug. The splitter provides only 12 V and 5 V fixed voltages; it cannot drive PWM control or 4-pin fans. If your build needs more than four fans or requires motherboard speed control, this adapter will not meet those needs.
Highlights
- Connect four 3-pin fans from one Molex connector
- Two 12 V headers for full-speed cooling
- Two 5 V headers for quieter low-speed operation
- 20 AWG copper wire delivers reliable power
- Short 6 inch length keeps cable routing tidy
Specifications
| Brand | En-Labs |
|---|---|
| Model | IDE243PIN6 |
| Type | Cable Splitters |
| Color | Multi-Color |
| Length | 6" - 10" |
| Specifications | Type :Molex 4pin to 4 x 3pin fan power splitter cable Cable Length : 6 inches Wire Gauge: 20AWG Copper Connector A: 1 x Molex 4 pin LP4 Male Connector B: 2 x TX3 3-pin Female for 12V DC 2- TX3 3-pin Female for 5V DC Voltage:12V/5V DC |
| Connector Number | 5 |
| Terminal Gender | Male to Male |
| Features | Allows you to connect Four 3-pin (TX3) fans to a single 4-pin Molex LP4 power supply connector This adatper cable works to serve the purpose of being able to add up to 4 fans,two for 12V DC and the others for 5V DC Speed Reduction |
Other versions of this model
1 more in the same range
Same family, different memory, cooler or clock — compare before you commit.
Questions about this item
How can I confirm the splitter is delivering power correctly after connecting the Molex plug and fans?
Verify each fan spins up when the system powers on; the two black TX3 headers supply 12 V and the two white headers supply 5 V for reduced speed.
What comes in the box and do I need any extra parts to run four 3-pin fans?
The package includes the 6-inch 20AWG cable with one Molex 4-pin LP4 male connector and four TX3 3-pin female headers; no additional cables are required.
Which version should I choose if I need both full-speed and reduced-speed fan operation?
This single model provides two 12 V headers for full speed and two 5 V headers for speed reduction, covering both needs in one cable.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115015BTC
In stock
