EN-Labs
EN-Labs EPSEX8 8 inch EPS 8pin power extension cord
An 8-inch EPS 8-pin extension adds reach to a short CPU power cable in large or complex builds using 18AWG tinned copper for reliable 12V delivery
- TypePower
- ColorMulti-Color
- Length6" - 10"
- SpecificationsType: EPS 8pin power extension cable Wire Gauge: 18AWG Tinne
- Connector Number2
- Terminal GenderMale to Female
- Reaches distant CPU sockets in large cases with 8 inch extension
- Delivers stable 12V power through 18AWG tinned copper conductors
- Connects PSU to motherboard via EPS 8pin male to female ends
- Solves short factory cables for cleaner routing in complex builds
- Supports standard 12V DC EPS power requirements
What this cable does
The EN-Labs EPSEX8 is an 8 inch EPS 8pin power extension cord built for PC builders whose PSU cables fall short of the CPU socket in a large chassis or a complex routing path. It adds 8 inches of reach between the PSU and the motherboard without changing the voltage or pinout.
Build and connectors
The cable uses 18AWG tinned copper conductors rated for 12V DC and terminates in a male EPS 8pin plug on one end and a matching female EPS 8pin socket on the other. The multi-colour sleeving helps identify the lead inside a crowded case and the flexible jacket eases routing behind motherboard trays or through tight grommets.
What the extension changes
By extending the EPS 12V lead the cord removes the need to stretch or reposition the power supply, reducing strain on the motherboard connector and allowing cleaner cable management. The extra length supports builds where the PSU sits far from the CPU socket or where custom loops and large coolers block the direct path. Builders who need more than 8 inches of additional reach will need a longer extension or a PSU with native longer cables.
Highlights
- Reaches distant CPU sockets in large cases with 8 inch extension
- Delivers stable 12V power through 18AWG tinned copper conductors
- Connects PSU to motherboard via EPS 8pin male to female ends
- Solves short factory cables for cleaner routing in complex builds
- Supports standard 12V DC EPS power requirements
Specifications
| Brand | En-Labs |
|---|---|
| Model | EPSEX8 |
| Type | Power |
| Color | Multi-Color |
| Length | 6" - 10" |
| Specifications | Type: EPS 8pin power extension cable Wire Gauge: 18AWG Tinned Copper Cable Length: 8 inch Connector A: 1 x EPS 8pin male Connector B: 1 x EPS 8pin female Voltage:12V DC |
| Connector Number | 2 |
| Terminal Gender | Male to Female |
| Features | EPS 8pin power extension cable designed to solve the problem of short-cabled 8 pin CPU connector equiped PSU in a large chassis or in a complex arrangement. Extend the cable length of your EPS power supply cable by 8 inches 18AWG copper conductors for reliable and durable connecting |
Questions about this item
What does the EPS 8-pin 12 V DC interface deliver in practice?
It carries 12 V DC power from the PSU to the CPU socket through 18 AWG tinned copper conductors, extending the reach by 8 inches without changing the voltage or pinout.
What clearance does the 8-inch cable need inside the case?
The 8-inch length adds 8 inches of flexible 18 AWG cable between the PSU EPS 8-pin male plug and the motherboard EPS 8-pin female socket, so allow that extra run behind the motherboard tray or along the routing channel.
How do I install the extension, and which orientation mistake should I avoid?
Plug the male end firmly into the PSU EPS 8-pin port and the female end onto the motherboard CPU 4+4 pin header, making sure the clip on each connector faces the correct latch so the keyed pins align.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114286BTC
In stock
