EN-Labs
EN-Labs CPU8SPLPCIE820CM 8 inch CPU 8-pin to 2 x PCIe 8-pin internal power cable
Converts a CPU 8-pin EPS connector into two PCIe 8-pin (6+2) outputs for graphics cards using 18AWG copper wire
- TypeCPU 8pin to 2 x PCIe 8pin power cable
- Length8 inch / 20CM
- Cable Length8 in.
- Connector ACPU 8-pin
- Connector B2 x PCIe 8pin
- Connector Number3
- Converts CPU 8-pin to dual PCIe 8-pin power
- 18AWG copper conductor handles high current reliably
- 8 inch length fits compact builds neatly
- Each PCIe end works as 6-pin or 8-pin
- Designed for graphics cards, not motherboards
8-inch EPS-to-PCIe splitter for GPU power
This 8-inch cable splits one EPS CPU 8-pin connector from a power supply into two PCIe 8-pin (6+2) connectors for graphics cards. It uses 18AWG copper conductors and is intended for powering GPUs in mining or high-power configurations. The short length keeps cable routing tidy inside compact cases.
Straightforward installation
The CPU 8-pin female end plugs directly into the PSU's EPS cable while the two 6+2 male ends connect to the graphics card. The 6+2 design lets each end serve either 6-pin or 8-pin sockets by sliding the extra two pins on or off. The supplier stresses that this cable must never be connected to a motherboard EPS socket; doing so will damage the board.
Verify your PSU has a spare CPU 8-pin output
This adapter draws GPU power from an EPS CPU connector, not from a PCIe connector on the power supply. Ensure your PSU provides an unused CPU 8-pin port and that its EPS wiring follows the standard pinout expected by the splitter. The cable is not a GPU-to-GPU splitter and cannot replace a native PCIe power cable from the PSU.
Highlights
- Converts CPU 8-pin to dual PCIe 8-pin power
- 18AWG copper conductor handles high current reliably
- 8 inch length fits compact builds neatly
- Each PCIe end works as 6-pin or 8-pin
- Designed for graphics cards, not motherboards
Specifications
| Brand | EN-Labs |
|---|---|
| Model | CPU8SPLPCIE820CM |
| Type | CPU 8pin to 2 x PCIe 8pin power cable |
| Length | 8 inch / 20CM |
| Cable Length | 8 in. |
| Connector A | CPU 8-pin |
| Connector B | 2 x PCIe 8pin |
| Connector Number | 3 |
| Features | En-Labs CPU8SPLPCIE820CM EPS CPU to 2 x 8pin Male to Female GPU Mining Power Supply Power Splitter Cable Connect one processor CPU 8-pin from Power Supply, enjoy two 6/8-pin PCI Express 2.0 output to your latest graphics cards. Build in UL Listed 18AWG copper conductor Connector A - CPU 8pin Male Connector B - PCI-E 8pin(6+2) Female Cable Length - 8 inches / 20CM Compatible with all 6-pin or 8-pin graphics cards and is great for NVIDIA SLI cards (needs quad 6-pin PCI Express 2.0) or ATI CrossFire cards (requires dual 8-pin PCI Express 2.0). |
Questions about this item
How do I verify the 18AWG splitter is delivering stable power after connecting the CPU 8-pin to my PSU?
After installation, check that both 6+2 PCIe connectors seat firmly and the GPU powers on without shutdowns under load.
What comes in the box and do I need extra cables for my graphics card?
The package includes one 20 cm CPU 8-pin female to dual PCIe 8-pin male splitter; no additional cables are required for compatible 6-pin or 8-pin GPUs.
Which version of the EN-Labs splitter should I choose for a dual 8-pin GPU setup?
Select the CPU8SPLPCIE820CM model — it provides two 6+2 PCIe ends from a single CPU 8-pin source, suited for dual 8-pin graphics cards.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115015BTC
In stock
