We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Five small square black anodised aluminium finned heatsinks, each 28 by 28 by 11 mm

EN-Labs

EN-Labs Black Aluminium Fin Heatsink 28x28x11mm 5pcs diy cooling

SKU CH-XTWA-SSJG6

Pack of five anodised aluminium fin heatsinks measuring 28×28×11 mm for RAM, GPU, chipset or 1 W LED cooling

  • ColorBlack
  • CompatibilityMotherboard Chipsets
  • MaterialAluminium
  • FeaturesAnodized Black Aluminum fin heatsink cooling , generally use
  • Dimensions28 x 28 x 11mm/1.10" x 1.10"x 0.43"(L*W*H)
  • Anodised black finish resists corrosion and improves heat radiation
  • Compact 28 x 28 x 11 mm profile fits tight spaces on motherboards
  • Aluminium construction with fins increases surface area for better thermal transfer
  • Pack of five heatsinks covers multiple components such as VRMs, chipsets and 1 W LEDs
  • Lightweight 50 g each adds minimal mass to the board

DIY Aluminium Heatsink Pack

This pack contains five black anodised aluminium fin heatsinks measuring 28 x 28 x 11 mm each. They are designed for DIY cooling of small electronic components such as chipsets, voltage regulators, power transistors, FETs, ICs, 1 W LEDs, RAM modules and GPU memory. The low-profile fins increase surface area to improve passive heat dissipation. Adhesive glue is required for mounting and is not included.

Passive Fin Cooling Limits

Each heatsink relies solely on natural convection and radiation to move heat away from the component. Without forced airflow the thermal capacity is modest, so the parts are suited to low-power devices rather than high-wattage processors. The 11 mm height restricts fin density, limiting total dissipation area. Performance drops quickly if the ambient temperature rises or if the contact surface is uneven.

Capacity and Headroom

The 28 mm square footprint covers many common chipset and VRM packages, while the 50 g total pack weight confirms the lightweight aluminium construction. They comfortably handle small ICs and 1 W LEDs but run out of headroom on larger GPUs or CPU dies that exceed the contact area. Always verify that the 1.10 inch dimensions match your target component before applying adhesive.

Highlights

  • Anodised black finish resists corrosion and improves heat radiation
  • Compact 28 x 28 x 11 mm profile fits tight spaces on motherboards
  • Aluminium construction with fins increases surface area for better thermal transfer
  • Pack of five heatsinks covers multiple components such as VRMs, chipsets and 1 W LEDs
  • Lightweight 50 g each adds minimal mass to the board

Specifications

ColorBlack
CompatibilityMotherboard Chipsets
MaterialAluminium
FeaturesAnodized Black Aluminum fin heatsink cooling , generally used in heat treatment and the cooling IC and electronic component, for example: RAM, CPU Memory , GPU, Graphics Card, Vidoe Card,also can be used for cooling of , northbridge ,Southbridge ,motherboard, power transistor, FET, IC, power amplifier, Voltage Regulator,1W LED etc.
The fins increase the area of the board and thus provide for greater heat transfer.
Use heatsink adhesive glue to install heatsink on the IC.Glue is not included here.
Size is 28mm x 28mm x 11mm low profile , Please check the specification table and make s
Dimensions28 x 28 x 11mm/1.10" x 1.10"x 0.43"(L*W*H)

Questions about this item

How many heatsinks come in this pack?

The listing supplies five identical aluminium fin heatsinks per lot, so one pack covers multiple small components such as VRM chips or memory modules.

What thermal improvement can I expect from a 28 by 28 by 11 millimetre finned block?

The anodised black fins increase surface area, letting each 50 gramme heatsink passively draw heat from ICs like MOSFETs, voltage regulators or 1 W LEDs without airflow.

How do I attach these heatsinks without a mounting bracket?

Use thermal adhesive glue (not included) to bond the flat base directly onto the chip package; the low 11 millimetre profile clears most neighbouring components.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.